AQAP2110-1 | Quality Management System Aligned to ISO 9001 plus NATO Supplementary Requirements | 25 |
AQAP2110-2 | Government Quality Assurance Representative (GQAR) Authority and Access | 37 |
AQAP2110-3 | Design and Development Control - NATO plus ISO 13485 Cross-Walk | 9 |
AQAP2110-4 | Configuration Management and Change Control | 18 |
AQAP2110-5 | Risk and Opportunity Management | 17 |
AQAP2110-6 | Subcontractor Supply Chain Control plus Counterfeit Material Prevention | 25 |
AQAP2110-7 | Production, Special Processes, Inspection, Testing, and Records | 14 |
AQAP2110-8 | Internal Audit, Management Review, Corrective Action, CofC, and Continual Improvement | 14 |
4 | Chapter 4 General QMS requirements | 0 |
4.1 | 4.1 QMS meeting this publication, including ISO 9001:2015 as needed for the contract | 0 |
4.2 | 4.2 QMS evidence available to the GQAR, and corrective proposals if the QMS is rejected | 0 |
4.3 | 4.3 Give the GQAR access, information, facilities and assistance at Supplier and External Provider sites | 0 |
5.1 | 5.1 Leadership | 0 |
5.1.1 | 5.1.1 Appoint a management representative for GQA reporting directly to top management | 0 |
5.2 | 5.2 Planning | 0 |
5.2.1 | 5.2.1 Manage risk from contract review onward to ISO 31000 and share the risk plan | 0 |
5.3 | 5.3 Support | 0 |
5.3.1 | 5.3.1 Provide a segregation area for nonconforming product | 0 |
5.3.2 | 5.3.2 Run the contract's measurement and calibration system to ISO 10012 and report calibration failures | 0 |
5.3.3 | 5.3.3 Maintain a process for training needs and competence of everyone affecting product quality | 0 |
5.3.4 | 5.3.4 Make contract staff and External Providers aware of the quality plan arrangements | 0 |
5.3.5 | 5.3.5 Give the GQAR access to contract documented information in an agreed format | 0 |
5.4 | 5.4 Operation | 0 |
5.4.1 | 5.4.1 Define acceptance evidence and keep product and process approval records, including for External Providers | 0 |
5.4.1.1 | 5.4.1.1 Submit an acceptable contract Quality Plan with a requirement and solution compliance matrix before work starts | 0 |
5.4.1.2 | 5.4.1.2 Configuration Management | 0 |
5.4.1.2.1 | 5.4.1.2.1 Manage configuration to ACMP 2100 across planning, identification, change control, status accounting and audit | 0 |
5.4.1.2.2 | 5.4.1.2.2 Prepare a Configuration Management Plan for the contract | 0 |
5.4.10 | 5.4.10 Control shelf life and declare remaining life before delivery | 0 |
5.4.11 | 5.4.11 Release only acceptable product with a Certificate of Conformity and give 10 working days notice of Acquirer inspections | 0 |
5.4.12 | 5.4.12 Control, report and obtain authority for nonconforming product and concessions | 0 |
5.4.2 | 5.4.2 Hold the post-award GQA meeting, keep lines to the GQAR and report organisational changes | 0 |
5.4.3 | 5.4.3 Identify product requirements tied to critical characteristics | 0 |
5.4.4 | 5.4.4 Determine verification and validation methods and show conformity at stages up to the final product | 0 |
5.4.5 | 5.4.5 Control dependability issues and documents when the contract requires it | 0 |
5.4.6 | 5.4.6 Keep and share verification records of purchased product | 0 |
5.4.6.1 | 5.4.6.1 Know the supply chain for critical items and flow down contract requirements with the GQA clause | 0 |
5.4.6.2 | 5.4.6.2 Ensure External Provider processes are implemented and prevent counterfeit materiel | 0 |
5.4.6.3 | 5.4.6.3 Share sub-contracts and notify the GQAR of risky sub-contracts and rejected supplied product | 0 |
5.4.7 | 5.4.7 Maintain production instructions and workmanship criteria | 0 |
5.4.8 | 5.4.8 Maintain traceability wherever failure could cause loss of equipment, performance or life | 0 |
5.4.9 | 5.4.9 Report lost, damaged or unsuitable Acquirer-supplied property at once | 0 |
5.5 | 5.5 Performance evaluation | 0 |
5.5.1 | 5.5.1 Record GQAR-reported deficiencies as customer complaints and answer with root cause and corrective action | 0 |
5.5.2 | 5.5.2 Audit all contract-critical processes annually, including NATO supplements, and report findings | 0 |
5.5.3 | 5.5.3 Management review | 0 |
5.5.3.1 | 5.5.3.1 Make contract-related management review inputs available to the GQAR | 0 |
5.5.3.2 | 5.5.3.2 Share contract-related review outputs and notify actions affecting contract compliance | 0 |
5.6 | 5.6 Improvement | 0 |
5.6.1 | 5.6.1 Define the root cause analysis process, tools and techniques for nonconformities | 0 |
PUBLICATION | AQAP-2110 Edition D Version 1: the publication and its applicability | 0 |
STATUS | Edition status: Edition D Version 1 (2016) is current; no Edition E or Version 2 exists in any published source | 0 |