Australia (national scheme administered by the NSW Government; CBD under Commonwealth law); NABERS NZ and NABERS UK adaptations exist

NABERS

108 controls. 30 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

108 controls 30 frameworks share controls with it Australia (national scheme administered by the NSW Government; CBD under Commonwealth law); NABERS NZ and NABERS UK adaptations exist verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

Every control

CodeControlAlso in
NABERS-1NABERS Governance, Accreditation, and Rating Methodology0
NABERS-2NABERS Energy Performance Rating3
NABERS-3NABERS Water Performance Rating27
NABERS-4NABERS Waste Performance Rating0
NABERS-5NABERS Indoor Environment Quality Rating0
NABERS-6NABERS Building Tuning, Commissioning, and Continuous Improvement3
NABERS-7Commercial Building Disclosure (CBD) and Mandatory Disclosure Compliance0
NABERS-8NABERS Reporting, Verification, Reratings, and Public Display0
AGR-COP-1Rate only through an individual accredited assessor following the Process Documents0
AGR-COP-2Keep assessor independence visible: disclose conflicts and take no outcome-based fees0
AGR-COP-3Co-operate with audits and remedy errors immediately0
AGR-COP-4Communicate about NABERS and its trade mark responsibly0
ATR-4Meet the Agreement to Rate milestones: occupancy within 6 years and ratings within 2 years0
ATR-6Give accurate information, keep project records seven years and notify transfers0
CA-1Enter a Commitment Agreement before claiming a design-stage NABERS target0
CA-4Produce a compliant energy estimate with margin, off-axis scenarios and risk assessment0
CA-6Pass Independent Design Review before the construction certificate0
CBD-11No offer to sell, lease or sublease without a registered current BEEC0
CBD-12Give a registered BEEC to a prospective purchaser, lessee or sublessee on request0
CBD-13Apply for the BEEC with an accredited energy rating and tenancy lighting assessment0
CBD-15Include the current NABERS Energy rating in every sale or lease advertisement0
CBD-17Hold a granted exemption before relying on one0
CBD-18Give the assessor information and access when the Secretary requires it0
CBD-19Use information obtained for a certificate only for permitted purposes0
CBD-20Assessor applies the determined methods and conditions of accreditation0
CBD-46-49Co-operate with auditors and answer the Secretary's compliance notices0
CBD-ACTThe Building Energy Efficiency Disclosure Act 2010: machinery for the state0
CBD-DABDetermine whether the building or area is disclosure affected0
CBD-DET-5Express and display the rating in advertisements as the Determination requires0
CBD-DET-6Work out the CBD energy rating under the incorporated NABERS Offices Rules0
CBD-DET-7Perform the Tenancy Lighting Assessment under the CBD rules0
CBD-DET-8Certificate carries the prescribed building, rating, emissions and lighting content0
CBD-REG-9Meet the prescribed conditions of CBD accreditation0
EPI-3Confirm eligibility for an Energy Performance Indicator and the site visit type0
EPI-5Measure rated area and answer the energy usage highlights0
EPI-7Cover all energy for the part or whole premises and treat student accommodation facilities correctly0
EWO-3.2Confirm the premises is eligible for a Base Building, Whole Building or Tenancy rating0
EWO-3.3Rate on a 12-month period and lodge within 120 days0
EWO-3.4Base the rating on acceptable data, with estimates within the 5 % limit0
EWO-3.5Conduct a new site visit for every rating, physical where the Rules require it0
EWO-3.6Use the CBD Program before excluding space for missing tenant data0
EWO-3.7Keep records that let an auditor repeat the rating, for seven years0
EWO-3.8Obtain National Administrator approval for alternative methods and uncovered situations0
EWO-4.3Verify office Net Lettable Area to the measurement standard0
EWO-4.4Divide office NLA into functional spaces at the minimum required granularity0
EWO-4.5Exclude non-office and commercially negotiated spaces from the rated area0
EWO-4.5.4Treat computer server rooms and data centres as the Rules require0
EWO-4.5.5Treat meeting rooms and other office support facilities by rating scope0
EWO-4.5.6Exclude functional spaces without consumption data, with the required evidence0
EWO-4.6.2Cap public access space at 10 % of net office NLA0
EWO-4.6.3Limit medical and educational office facilities to 25 % in base building ratings only0
EWO-4.7Weight functional spaces by occupation days and up to 30 fitout days0
EWO-5.3.2Determine Core Hours from the Owner/Tenant Agreement correctly0
EWO-5.3.3Count after-hours air conditioning only from dated tenant requests0
EWO-5.3.4Use a Tenant Occupancy Survey only when higher-priority methods fail, completed by the right person0
EWO-5.3.5Apply default hours of 45 per week only as a documented fallback0
EWO-5.3.6Estimate Average Core Hours only as an acceptable estimate added to potential error0
EWO-5.3.7Set hours for separated server rooms and support facilities by scope0
EWO-5.4Verify rated hours of 60 or more per week0
EWO-5.5Enter Core Hours that vary over the period or the week as the Rules direct0
EWO-6.3.2Count only complete personal computer systems in regular use0
EWO-6.3.3Conduct an actual on-site count, timed for activity-based working0
EWO-6.3.4Estimate or apply the default count only where permitted0
EWO-7.2Cover the minimum energy end uses for the rating scope0
EWO-7.3.1Match server room energy treatment to its area treatment0
EWO-7.3.2Allocate supplementary air conditioning and other services between base building and tenant0
EWO-7.3.3Include energy of tenant-only spaces and exclude other spaces only when properly metered0
EWO-7.3.4Include and apportion car park energy by the car park rules0
EWO-7.4Cover all office water uses, including metered fire system water0
EWO-C.3Adjust rating periods and choose renew or replace for successive ratings correctly0
HTL-3Confirm hotel eligibility and classify the hotel type0
HTL-4Count guest rooms, out-of-service periods and laundry serviced rooms0
HTL-6Establish the hotel quality rating, pool area and function room seats0
HTL-9Cover all hotel energy and water end uses including charge-to-room facilities0
IE-3Choose the IE rating scope and collect every component it requires0
IE-4.3Determine office floor area, occupied floors and the number of sampling floors and points0
IE-4.6Select floors and locations by the priority rules and record them in a sample collection plan0
IE-5Run the Occupant Satisfaction Survey through an approved provider before measuring0
IE-6Conduct the site visit and spot measurements under normal operation0
IE-7Assess thermal services by spot measurements and verified annual temperature data0
IE-8Measure air quality components with the specified methods and windows0
IE-9Measure ambient sound and horizontal illuminance as specified0
MC-10Evidence every renewable claim in the Renewable Energy Indicator0
MC-3.2Apply the common data hierarchy and enter data exactly as sourced0
MC-4.2Identify every energy and water source and supply point on site0
MC-4.3Check sources against minimum coverage and run the office and retail cross-checks0
MC-4.4Confirm meter types and use non-utility meters only as the Rules allow0
MC-5.3Secure 12 months of acceptable utility data aligned to the rating period0
MC-5.4Correct estimated or missing utility readings by the permitted methods0
MC-5.5Report water with and without purchased recycled water0
MC-6Handle non-utility meter data to the same 12-month standard0
MC-7Validate CT, gas and remote-read meters and meet the 10-year validation schedule0
MC-7.4Correct or stop when validation finds a faulty meter0
MC-8.2Estimate small unmetered loads and apportioned exclusions only within the Rules0
MC-8.3Account for batch-delivered fuels and water and for EV charging0
MC-9Treat on-site generation, storage and captured water by the Rules0
PRT-3Calculate and publish portfolio ratings by the aggregation and disclosure rules0
PRT-4Obtain exemptions for ineligible or atypical assets and apply optional exclusions uniformly0
SCHEMENABERS: the scheme and its rating tools0
SFC-1Evidence sustainable finance alignment with NABERS ratings0
STATUSStatus: current versions, the 2026 Determination and pending sunsets0
WST-10Lodge, rate and keep records under the waste validity and precinct rules0
WST-3.6Visit site for every waste rating and verify configuration and practices0
WST-5Include every core waste stream and only eligible optional streams0
WST-6Record at least 90 % of collections with measured weights or bin counts0
WST-7Conduct contamination, density and composition audits by the procedure0
WST-8Verify weight and bin-count data against the tests and a second source0
WST-9Evidence recovery pathways for the Material Recovery Score0

Tell me when NABERS files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for NABERS, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition