United States (federal, pre-empting inconsistent state and local requirements under 49 U.S.C. 5125)

US DOT Hazardous Materials Regulations (49 CFR Parts 171 to 180)

30 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

30 controls 0 frameworks share controls with it United States (federal, pre-empting inconsistent state and local requirements under 49 U.S.C. 5125) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
171-INTROPurpose, definitions, reference material and incorporation by reference (171.1, 171.7, 171.8, 171.9)0
171.15-16Incident reporting: immediate telephone notice for serious incidents and written DOT Form F 5800.1 within 30 days (171.15, 171.16)0
171.2General requirements: no offering or transporting unless the material is properly classed, described, packaged, marked, labeled and in condition for transport; no false representat0
171.22-26Use of international standards: ICAO Technical Instructions, IMDG Code, Transport Canada TDG and UN Recommendations with the additional US conditions (171.22 to 171.26)0
172.101-102Hazardous Materials Table and special provisions: proper shipping name, hazard class, identification number, packing group, labels, packaging and quantity limits (172.101, 172.102)0
172.200-205Shipping papers: description, sequence, quantity, emergency response telephone number, shipper's certification and retention (172.200 to 172.205)0
172.300-338Marking: proper shipping name, identification number, technical names, orientation arrows, limited quantity and other package markings; bulk packaging identification numbers (172.30
172.400-406Labeling: primary and subsidiary hazard labels, placement near the shipping name, size, durability and the 172.400a exceptions (172.400 to 172.407)0
172.500-560Placarding: offeror provides and carrier affixes placards on bulk packagings, freight containers, transport vehicles and rail cars; Tables 1 and 2; the 1,001 pound threshold and DA0
172.600-606Emergency response information on or with the shipping paper and a monitored emergency response telephone number (172.600 to 172.606)0
172.700-704Hazmat employee training: general awareness, function-specific, safety, security awareness and in-depth security training, initial within 90 days and recurrent every three years, w0
172.800-804Security plans: required for listed shipments, with risk assessment, personnel security, unauthorised access and en route security components, written, reviewed annually, with trai0
172.820-822Rail carriers of security-sensitive materials: annual commodity data, route analysis, alternative route evaluation and selection, with public point of contact and storage limits (10
173.1-22Shipper's responsibility: determine the hazard class, select an authorised packaging, assemble it as the manufacturer's closure instructions require, and meet the Part 173 general 0
173.150-156Exceptions: limited quantities, consumer commodities (ORM-D), excepted quantities and the class-specific exceptions, with the conditions each imposes (173.4, 173.4a, 173.4b, 173.150
173.158-230Class-specific packaging requirements for non-bulk and bulk packagings: Parts 173 Subparts E and F (173.158 to 173.249), including Division 6.2 infectious substances, Class 7 and t0
173.24-24bGeneral requirements for packagings and packages: no release, compatibility, closures, filling limits, absorbent material, outage and pressure, venting and the non-bulk and bulk ad0
173.25-40Overpacks, reuse and reconditioning of packagings, empty packagings, salvage packagings, and cylinder and portable tank general use (173.25, 173.28, 173.29, 173.3, 173.301 family, 0
173.50-140Hazard class definitions and classification criteria: Classes 1 to 9 and ORM-D, precedence of hazards, and the explosives, flammable, oxidiser, poison, infectious substance, radioa0
174Carriage by rail: acceptance, shipping paper, placard and car inspection, loading and unloading, segregation and the tank car special rules (174.1 to 174.115)0
175Carriage by aircraft: acceptance checks, pilot-in-command notification, quantity limits, loading and stowage, inspection for damage, lithium battery and oxygen rules and passenger 0
176Carriage by vessel: dangerous cargo manifest, stowage and segregation, inspection, port and ferry restrictions, and the class-specific vessel provisions (176.1 to 176.907)0
177.800-817Carriage by public highway: carrier acceptance and training, driver instruction, shipping paper accessibility in the cab, and retention (177.800 to 177.817)0
177.834-848Highway loading, unloading, segregation, attendance and class-specific handling: securement, no smoking, brakes set, attendance of cargo tanks, the 177.848 segregation table and th0
178-SPECPackaging specifications and the manufacturer's and certifier's duties: cylinders, UN standard non-bulk packagings and performance tests, IBCs and large packagings, cargo tanks and0
179Tank car specifications: approval by the AAR Tank Car Committee, design, construction, pressure relief, thermal protection, head shields and the DOT 105, 111, 112, 113, 117 and 1200
180.205-215Continuing qualification of cylinders: requalification by a PHMSA-approved requalifier, visual and hydrostatic or ultrasonic tests at the 180.209 intervals, condemnation and markin0
180.405-417Continuing qualification of cargo tanks: external and internal visual, lining, leakage, pressure and thickness tests at the 180.407 intervals, by Registered Inspectors, with repair0
180.500-605Continuing qualification of tank cars, portable tanks and IBCs: periodic inspection and test intervals, qualified facilities, repairs and records (180.501 to 180.519, 180.601 to 180
HMR-ENFEnforcement, special permits, approvals and registration (Part 107 and the HMR's references): introduction0

Tell me when US DOT Hazardous Materials Regulations (49 CFR Parts 171 to 180) files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for US DOT Hazardous Materials Regulations (49 CFR Parts 171 to 180), drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition