Philippines

Philippines Occupational Safety and Health Standards

28 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

28 controls 0 frameworks share controls with it Philippines verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
R1000Rule 1000: purpose and scope (every place of employment), definitions, administration and enforcement by the Department of Labor and Employment, special inspections and the duties 0
R1010Rule 1010: how Rules are promulgated and amended, application of specific rules to similar situations, abatement of imminent danger by stoppage order, and the list of hazardous wor0
R1020Rule 1020 Registration: every employer registers each establishment with the Regional Labor Office before operating, free of charge, with a scaled floor-by-floor layout plan, and r0
R1030Rule 1030 Training of personnel: Bureau-prescribed OSH training through accredited organisations, the training as a prerequisite for appointment as safety man, and the number of fu0
R1040Rule 1040 Health and Safety Committee: a committee in every place of employment within a month of starting, reorganised every January, composed by headcount type A to E, meeting mo0
R1050Rule 1050 Notification and records: disabling injuries, occupational illnesses and dangerous occurrences reported on the prescribed form by the 20th of the following month with a c0
R1060Rule 1060 Premises: safety signs in standard colours, housekeeping, separate comfort rooms and dressing and locker rooms, structurally sound buildings with plans approved by the Bu0
R1070Rule 1070 Occupational health and environmental control: threshold limit values for airborne contaminants (ceiling and eight-hour time-weighted averages with limited excursions), p0
R1080Rule 1080 Personal protective equipment: furnished at the employer's expense wherever hazards require, of approved design, maintained by the employer, nobody exposed without protec0
R1090Rule 1090 Hazardous materials: substitution and process revision first, control of processes by segregation, enclosure, local exhaust and ventilation, PPE to supplement controls, l0
R1100Rule 1100 Welding and cutting: no hot work near combustibles, explosives or flammable atmospheres until hazards are removed, no welding on containers that held flammables unless cl0
R1120Rule 1120 Hazardous work processes: before entering an underground tank or similar confined space, water level checked, air tested for explosive gases, oxygen and carbon monoxide, 0
R1140Rule 1140 Explosives: manufacture, handling and storage only in approved places, buildings used for nothing else, quantity and distance tables, magazine construction and storage ru0
R1150Rule 1150 Materials handling and storage: safe clearances and marked aisles for mechanical handling, tiered storage stacked, blocked and limited in height, storage areas free of tr0
R1160Rule 1160 Boilers: no boiler installed or operated without the Secretary's permit, applications with manufacturer data and plans, cleared repairs, transfer reporting within thirty 0
R1170Rule 1170 Unfired pressure vessels: the boiler permit and application regime applied to pressure vessels, manufacturer's certificates, accessible installation, protected safety val0
R1180Rule 1180 Internal combustion engines: coverage of generators, standby units, prime movers and construction and agricultural engines, the PSME Code and Rule 1060 as minimum standar0
R1200Rule 1200 Machine guarding: all moving parts of prime movers and transmission equipment and all dangerous parts of driven machinery effectively guarded, built-in safety specified w0
R1210Rule 1210 Electrical safety: the Philippine Electrical Code adopted as the safety standard, no installation without plans approved by the Secretary and prepared by a licensed profe0
R1220Rule 1220 Elevators and related equipment: sound design, construction and maintenance of every part, fully enclosed fire-resistant hoistways, the general and standards requirements0
R1230Rule 1230 Identification of piping systems: contents of industrial and power plant piping identified primarily by stencilled or lettered legends, supplemented by colour or colour b0
R1240Rule 1240 Power piping lines: applications with signed and sealed drawings filed with the Regional Labor Office, no connection without cleared plans and no operation until final in0
R1410Rule 1410 Construction safety: a health and safety committee and medical and dental service on every site, alternative materials of equal strength, shoring of excavations deeper th0
R1420Rule 1420 Logging: a safety committee and medical and dental service, trained first aiders in charge of every gang, communication and transport for the injured, maintained hand too0
R1940Rule 1940 Fire protection and control: buildings sited and built to the Building and Fire Codes, height limits by construction type, segregation of explosion and flash-fire process0
R1950Rule 1950 Pesticides and fertilizers: handled only by thoroughly instructed persons, label precautions followed for application, protective clothing and equipment, no smoking, eati0
R1960Rule 1960 Occupational health services: every employer establishes occupational health services, keeps the Table 47 medicines, supplies and facilities, provides first aiders, nurse0
R1970-90Rules 1970 to 1990: fees for safety inspection and plan checking, authority delegated to chartered cities and other agencies, technical versus general safety inspection, false stat0

Tell me when Philippines Occupational Safety and Health Standards files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for Philippines Occupational Safety and Health Standards, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition