1 | Purpose, scope and audience | 0 |
2.1a | Secure every component of the telework and remote access solution | 0 |
2.1b | Threat-model the remote access servers and reachable resources before deployment | 0 |
2.1c | Plan on the assumptions that devices will be lost, infected and used on hostile networks | 0 |
2.2 | Choose remote access methods with their security implications in view | 0 |
2.3 | Put BYOD and third-party devices in a separate, external network | 0 |
3.1 | Harden, isolate and administer remote access servers securely | 0 |
3.2 | Place remote access servers at the network perimeter and restrict their internal reach | 0 |
3.3.1 | Authenticate every teleworker, with multi-factor and mutual authentication where warranted | 0 |
3.3.2 | Use device health checks and network access control where feasible, without relying on them | 0 |
3.3.3 | Protect remote access communications with approved cryptography and consider disabling split tunnelling | 0 |
3.3.4 | Limit teleworkers to the applications they need, considering what those applications reach | 0 |
3.4 | Plan how remote access client software and telework devices will be maintained and remotely managed | 0 |
4.1 | Secure telework PCs: multi-policy firewalls, tested auto-sensing, updates and limited privileges | 0 |
4.2 | Secure telework mobile devices through centralised management and guidance | 0 |
4.3 | Treat telework data as an organisational asset and protect sensitive information on devices | 0 |
4.3.1 | Encrypt all sensitive data at rest on telework devices and removable media | 0 |
4.3.2 | Set policy for telework data held in virtual machine images and encrypt them where risk warrants | 0 |
4.3.3 | Back up telework device data with protected transport and protected copies | 0 |
5.1 | Write a telework security policy and record it in the system security plan | 0 |
5.1.1 | Permit only remote access forms that can meet the overall security policy | 0 |
5.1.2 | Set risk-based access tiers by device type, bar unknown devices and reassess periodically | 0 |
5.1.3 | Educate teleworkers, define their responsibilities and provide help and secure communications | 0 |
5.2 | Design authentication, access control, endpoint security and incident handling, and document them | 0 |
5.3 | Test the implementation thoroughly and lock down defaults before production | 0 |
5.4 | Operate and maintain: patch, review logs, report anomalies and assess policy compliance | 0 |
5.5 | Sanitise telework devices and remote access servers before they leave the organisation | 0 |
A | Appendix A: SP 800-53 controls relevant to telework and remote access | 0 |