New Zealand (GCSB / NCSC; published by the GCISO)

New Zealand Information Security Manual (NZISM)

1438 controls. 145 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

1438 controls 145 frameworks share controls with it New Zealand (GCSB / NCSC; published by the GCISO) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

Every control

Showing 400 of 1438. The kit carries all of them.

CodeControlAlso in
NZISM-1NZISM Governance, Documentation, and Classification System94
NZISM-2Certification and Accreditation (C&A) for Government Systems25
NZISM-3Personnel Security, Physical Security, and Cryptography114
NZISM-4Access Control, Authentication, and Communications Security0
NZISM-5Network Security, System Hardening, and Application Security57
NZISM-6Event Logging, Monitoring, Incident Response, and Business Continuity0
NZISM-7Media Handling, Outsourcing, Cloud Services, and Remote Access0
NZISM-8Security Risk Management, Vulnerability Management, and Incident Reporting0
1.1-COMPLIANCECompliance language, baseline and good-practice controls, waivers and exceptions (1.1)0
1.1.64.C.011.1.64.C.01 Dispensations for baseline non-compliance granted by Accreditation Authority0
1.1.65.C.011.1.65.C.01 Risk assessment supporting a non-compliance dispensation1
1.1.66.C.011.1.66.C.01 Consult originating agency before classification non-compliance0
1.1.66.C.021.1.66.C.02 Consult foreign government before NZISM non-compliance0
1.1.67.C.011.1.67.C.01 Formal consultation for shared and All-of-Government systems0
1.1.68.C.011.1.68.C.01 Annual review of non-compliance decisions0
1.1.69.C.011.1.69.C.01 Retain records of non-compliance decisions and assessments0
1.1.69.C.021.1.69.C.02 Recording residual risk from unimplemented recommended controls1
1.2-AUTHORITYApplicability and authority: who must comply and on what mandate (1.2)0
1.2.15.C.011.2.15.C.01 Use current NZISM version for system design0
1.2.15.C.021.2.15.C.02 Comply with GCSB-designated priority NZISM requirements0
10.1.42.C.0110.1.42.C.01 Fibre optic backbone at CONFIDENTIAL and above0
10.1.42.C.0210.1.42.C.02 Fibre optic cable preferred for backbone infrastructure0
10.1.43.C.0110.1.43.C.01 Use fibre optic cabling generally0
10.1.43.C.0210.1.43.C.02 Consult GCSB on fibre with conductive strengtheners0
10.1.43.C.0310.1.43.C.03 Consult GCSB when copper cables are specified0
10.1.43.C.0410.1.43.C.04 Avoid fibre with conductive metal strengtheners or sheaths0
10.1.44.C.0110.1.44.C.01 Cabling installed to New Zealand standards0
10.1.45.C.0110.1.45.C.01 Cable and conduit colours by classification1
10.1.45.C.0210.1.45.C.02 Label and document additional colour-coded networks1
10.1.46.C.0110.1.46.C.01 Agree foreign system cable colour at TOP SECRET0
10.1.46.C.0210.1.46.C.02 Foreign system cable colours distinct at TOP SECRET0
10.1.46.C.0310.1.46.C.03 Agree foreign system cable colour with stakeholders0
10.1.46.C.0410.1.46.C.04 Avoid shared colours for foreign and New Zealand cables0
10.1.47.C.0110.1.47.C.01 Seek GCSB advice on combining special network cabling0
10.1.47.C.0210.1.47.C.02 Only approved fibre groupings in shared conduits1
10.1.48.C.0110.1.48.C.01 Fibres within one cable sheath carry one classification0
10.1.48.C.0210.1.48.C.02 Each fibre cable subunit carries one classification0
10.1.48.C.0310.1.48.C.03 No mixing of RESTRICTED and CONFIDENTIAL-plus in a cable0
10.1.49.C.0110.1.49.C.01 Follow GCSB directions for cabling audio secure areas0
10.1.50.C.0110.1.50.C.01 Different connectors per classification at shared outlets0
10.1.50.C.0210.1.50.C.02 Distinct TOP SECRET connectors in mixed outlet areas0
10.1.50.C.0310.1.50.C.03 Label outlets with classification and connector type0
10.1.50.C.0410.1.50.C.04 Outlet labels show classification and connector type0
10.1.51.C.0110.1.51.C.01 Power filters for filtered supply (cable fundamentals)0
10.2.10.C.0110.2.10.C.01 Power filters in non-shared government facilities0
10.2.6.C.0110.2.6.C.01 TOP SECRET cabling inspectable every five metres0
10.2.6.C.0210.2.6.C.02 Cabling inspectable at five-metre intervals0
10.2.7.C.0110.2.7.C.01 Partition or gap between cable groups in shared reticulation1
10.2.8.C.0110.2.8.C.01 Flexible or plastic conduit from trays to outlets0
10.2.9.C.0110.2.9.C.01 Inspectable gap between TOP SECRET and lower cabinets0
10.3.10.C.0110.3.10.C.01 Conduit and sealant at TOP SECRET wall penetrations1
10.3.11.C.0110.3.11.C.01 Dedicated power board and UPS for TOP SECRET facility0
10.3.12.C.0110.3.12.C.01 Power filters in shared government facilities0
10.3.13.C.0110.3.13.C.01 Visible gap separating TOP SECRET cabinets, shared facilities0
10.3.5.C.0110.3.5.C.01 Fibre optic cabling in shared government facilities0
10.3.6.C.0110.3.6.C.01 TOP SECRET cables fully inspectable in shared facilities0
10.3.6.C.0210.3.6.C.02 Five-metre inspection intervals in shared government facilities0
10.3.7.C.0110.3.7.C.01 Separate cable groups before sharing reticulation1
10.3.8.C.0110.3.8.C.01 Clear plastic covers for TOP SECRET conduits and trays0
10.3.9.C.0110.3.9.C.01 Flexible or plastic conduit to wall outlets, shared facilities0
10.4.10.C.0110.4.10.C.01 Seal conduit at penetrations into lower classified areas1
10.4.11.C.0110.4.11.C.01 Power board inside secure area with UPS to equipment1
10.4.12.C.0110.4.12.C.01 Mandatory power filters in shared non-government facilities0
10.4.13.C.0110.4.13.C.01 Gap or isolator between cabinets of different classification0
10.4.13.C.0210.4.13.C.02 Inspectable gap or isolator between classified cabinets0
10.4.4.C.0110.4.4.C.01 Fibre optic cabling mandatory in TOP SECRET areas0
10.4.4.C.0210.4.4.C.02 Fibre optic cabling in shared non-government facilities0
10.4.5.C.0110.4.5.C.01 Full-length inspection of TOP SECRET cables, non-government0
10.4.5.C.0210.4.5.C.02 Five-metre inspection intervals, shared non-government facilities0
10.4.6.C.0110.4.6.C.01 Partition or gap for TOP SECRET shared reticulation1
10.4.6.C.0210.4.6.C.02 TOP SECRET cabling in non-shared enclosed reticulation0
10.4.6.C.0310.4.6.C.03 Separation for cable groups in shared non-government reticulation0
10.4.7.C.0110.4.7.C.01 Clear or sealed covers on TOP SECRET conduits1
10.4.7.C.0210.4.7.C.02 Clear or sealed covers on conduits and trays1
10.4.8.C.0110.4.8.C.01 No cabling in party walls0
10.4.9.C.0110.4.9.C.01 GCSB endorsed tamper evident seals on removable covers1
10.4.9.C.0210.4.9.C.02 Uniquely numbered seals with location register0
10.4.9.C.0310.4.9.C.03 Glue or sealant on TOP SECRET conduit joints0
10.4.9.C.0410.4.9.C.04 Seal conduit joints with glue or sealant0
10.5.10.C.0110.5.10.C.01 Minimum cable register fields at CONFIDENTIAL and above1
10.5.10.C.0210.5.10.C.02 Minimum cable register content1
10.5.11.C.0110.5.11.C.01 Inspect cables against register at SSP frequency0
10.5.4.C.0110.5.4.C.01 Conduit label colours by classification1
10.5.5.C.0110.5.5.C.01 Discreet conduit labels in public or visitor areas0
10.5.6.C.0110.5.6.C.01 Wall outlet boxes show classification and numbers0
10.5.6.C.0210.5.6.C.02 Outlet boxes marked with classification, cable, outlet numbers0
10.5.7.C.0110.5.7.C.01 SOPs record labelling and registration conventions0
10.5.8.C.0110.5.8.C.01 Label both cable ends for identification at CONFIDENTIAL-plus0
10.5.8.C.0210.5.8.C.02 Label cable ends for identification and inspection0
10.5.9.C.0110.5.9.C.01 Maintain a cable register at CONFIDENTIAL and above0
10.5.9.C.0210.5.9.C.02 Keep a register of cables0
10.6.22.C.0110.6.22.C.01 Only approved cable groups terminate on a patch panel0
10.6.22.C.0210.6.22.C.02 Separate and bundle RED and BLACK cables0
10.6.23.C.0110.6.23.C.01 Distinct connectors per classification in multi-classification areas0
10.6.23.C.0210.6.23.C.02 Document connector type choice per classification0
10.6.23.C.0310.6.23.C.03 Different connectors for each system in mixed areas0
10.6.23.C.0410.6.23.C.04 Document connector types in mixed classification areas0
10.6.24.C.0110.6.24.C.01 Separate cabinets for patch panels of different classification0
10.6.24.C.0210.6.24.C.02 Conditions for mixed classification patch panels in one cabinet1
10.6.25.C.0110.6.25.C.01 Cabinet layout RED top, BLACK centre, power bottom0
10.6.26.C.0110.6.26.C.01 Record equipment layouts on rack diagrams0
10.6.27.C.0110.6.27.C.01 Fibre fly lead length and long-lead conditions1
10.6.28.C.0110.6.28.C.01 Equipotential bonding of all earthing points0
10.6.28.C.0210.6.28.C.02 Earth bond all conductive cabinet and rack elements0
10.6.29.C.0110.6.29.C.01 Cabinet rail installation for cable management0
10.6.30.C.0110.6.30.C.01 Apply cable labelling principles and specific requirements1
10.6.31.C.0110.6.31.C.01 Follow good practice for power cable installation1
10.7.6.C.0110.7.6.C.01 Emanation threat assessment for co-located RF transmitters1
10.7.6.C.0210.7.6.C.02 RF transmitters co-located with CONFIDENTIAL-plus systems1
10.7.7.C.0110.7.7.C.01 Emanation threat assessment for overseas classified deployments1
10.7.7.C.0210.7.7.C.02 Emanation advice for overseas system deployments1
10.7.8.C.0110.7.8.C.01 Early emanation security threat assessment in projects0
10.7.9.C.0110.7.9.C.01 EMI/EMC standards for equipment in secure areas1
10.8.34.C.0110.8.34.C.01 Documented risk assessment before network architecture design0
10.8.34.C.0210.8.34.C.02 Separation, segregation and classification in network risk assessment0
10.8.35.C.0110.8.35.C.01 Security architecture applies separation and segregation0
10.8.36.C.0110.8.36.C.01 Identify classification and restrictions per network part0
10.8.37.C.0110.8.37.C.01 Visually distinguish systems of different classifications0
10.8.38.C.0110.8.38.C.01 Maintain a network information repository0
11.1.15.C.0111.1.15.C.01 Bluetooth usage policy defining permitted and prohibited use0
11.1.15.C.0211.1.15.C.02 Bluetooth policy specifies security controls and verification methods0
11.1.16.C.0111.1.16.C.01 Bluetooth pairing restricted to authorised devices1
11.1.16.C.0211.1.16.C.02 Bluetooth discoverability disabled except during pairing0
11.1.16.C.0311.1.16.C.03 Bluetooth pairing performed only in access-controlled locations0
11.1.16.C.0411.1.16.C.04 Removal of Bluetooth pairings no longer needed0
11.1.17.C.0111.1.17.C.01 Most secure Bluetooth configuration supported by paired devices0
11.1.17.C.0211.1.17.C.02 Identify Bluetooth type, version and security capabilities for risk decisions0
11.1.17.C.0311.1.17.C.03 Explicit user authentication of new Bluetooth connections1
11.1.18.C.0111.1.18.C.01 Bluetooth authentication and approved algorithms for UNCLASSIFIED and IN-CONFIDENCE1
11.1.18.C.0211.1.18.C.02 Bluetooth authentication and approved algorithms for RESTRICTED and SENSITIVE1
11.1.18.C.0311.1.18.C.03 Risk assessment and waiver when Bluetooth cannot meet approved encryption0
11.1.19.C.0111.1.19.C.01 Technical evaluation and Accreditation Authority approval for Bluetooth in secure areas1
11.1.19.C.0211.1.19.C.02 Bluetooth emanation and classification separation in secure areas0
11.1.19.C.0311.1.19.C.03 Bluetooth devices barred from secure areas without authorisation0
11.2.11.C.0111.2.11.C.01 RF devices kept out of classified secure areas0
11.2.11.C.0211.2.11.C.02 RF devices in secure areas only with Accreditation Authority authorisation0
11.2.12.C.0111.2.12.C.01 Limiting RF range beyond the agency's area of control1
11.2.13.C.0111.2.13.C.01 Detection of and response to active RF devices in secure areas0
11.2.14.C.0111.2.14.C.01 Wireless RF and IR pointing devices prohibited in secure areas1
11.2.15.C.0111.2.15.C.01 Infrared keyboard restrictions for SECRET and CONFIDENTIAL areas0
11.2.15.C.0211.2.15.C.02 Infrared keyboard restrictions for TOP SECRET areas0
11.2.15.C.0311.2.15.C.03 IR receiver positioned away from secure area boundary0
11.3.10.C.0111.3.10.C.01 Cordless telephones not combined with secure telephony devices0
11.3.11.C.0111.3.11.C.01 Speakerphone controls on secure telephone systems in secure areas1
11.3.12.C.0111.3.12.C.01 Off-hook audio protection on non-accredited telephones in classified areas1
11.3.12.C.0211.3.12.C.02 Push-to-talk for off-hook audio protection with clear labelling0
11.3.12.C.0311.3.12.C.03 Off-hook audio protection recommended at all classifications1
11.3.13.C.0111.3.13.C.01 Removal of unused voice mailboxes0
11.3.13.C.0211.3.13.C.02 Voicemail expiry per electronic records retention policy0
11.3.13.C.0311.3.13.C.03 Retention and disposal policy for voicemail, email and electronic records0
11.3.5.C.0111.3.5.C.01 Policy governing telephone and telephone system use0
11.3.6.C.0111.3.6.C.01 Personnel told maximum classification for telephone conversations0
11.3.6.C.0211.3.6.C.02 Awareness of audio security risk from telephones0
11.3.7.C.0111.3.7.C.01 Telephones showing the classification of the connection1
11.3.8.C.0111.3.8.C.01 Accredited and encrypted telephone systems for classified traffic1
11.3.9.C.0111.3.9.C.01 Cordless telephones prohibited for classified conversations0
11.3.9.C.0211.3.9.C.02 Avoid cordless telephones for classified or sensitive calls0
11.4.10.C.0111.4.10.C.01 Personnel told maximum classification for mobile device conversations0
11.4.10.C.0211.4.10.C.02 Awareness of known mobile device risks near classified conversations0
11.4.11.C.0111.4.11.C.01 Certified networks, encryption and user awareness for classified mobile use1
11.4.12.C.0111.4.12.C.01 Mobile devices excluded from classified secure areas0
11.4.12.C.0211.4.12.C.02 Lockers for mobile devices outside secure areas0
11.4.9.C.0111.4.9.C.01 Mobile device usage policy0
11.5.13.C.0111.5.13.C.01 Personal wearable device usage policy including fitness devices0
11.5.14.C.0111.5.14.C.01 Personnel told maximum classification where wearables are present0
11.5.14.C.0211.5.14.C.02 Awareness of wearable device risks in secure and classified areas0
11.5.15.C.0111.5.15.C.01 Personal wearable devices excluded from secure areas0
11.5.15.C.0211.5.15.C.02 Lockers for wearable devices outside secure areas0
11.5.16.C.0111.5.16.C.01 Prohibited capabilities on medically approved wearables1
11.5.16.C.0211.5.16.C.02 Accredited networks and user awareness for medically exempt wearables0
11.5.16.C.0311.5.16.C.03 Privacy legislation compliance for medically permitted wearables1
11.6.59.C.0111.6.59.C.01 Documented risk assessment before adopting RFID0
11.6.59.C.0211.6.59.C.02 RFID risk assessment underpins security architecture0
11.6.60.C.0111.6.60.C.01 Security architecture protecting RFID databases and systems0
11.6.60.C.0211.6.60.C.02 Minimise data on RFID tags and subsystems0
11.6.60.C.0311.6.60.C.03 Disable rewrite functions on RFID devices0
11.6.60.C.0411.6.60.C.04 NZISM Chapter 11 access control requirements applied to RFID0
11.6.61.C.0111.6.61.C.01 RFID usage policy developed and maintained0
11.6.61.C.0211.6.61.C.02 RFID included in security policies and documentation0
11.6.62.C.0111.6.62.C.01 Inspect and neutralise RFID devices on incoming items0
11.6.62.C.0211.6.62.C.02 Visual inspection for attached RFID devices of concern0
11.6.62.C.0311.6.62.C.03 Visual inspection for tampered RFID devices or labels0
11.6.63.C.0111.6.63.C.01 RF engineering assessment for RFID in high RF or concern areas0
11.6.63.C.0211.6.63.C.02 Shielding for RFID eavesdropping or radiation concerns0
11.6.64.C.0111.6.64.C.01 RFID tag and reader placement to limit radiation0
11.6.65.C.0111.6.65.C.01 RFID cryptography per NZISM Chapter 170
11.6.65.C.0211.6.65.C.02 Encrypt data before writing to RFID tags0
11.6.65.C.0311.6.65.C.03 RFID identifier formats that limit disclosure0
11.6.66.C.0111.6.66.C.01 HMAC for RFID tag authenticity0
11.6.67.C.0111.6.67.C.01 Passwords set for critical RFID functions0
11.6.67.C.0211.6.67.C.02 RFID password management per NZISM Chapter 160
11.6.68.C.0111.6.68.C.01 Temporary deactivation of long-inactive RFID tags0
11.6.69.C.0111.6.69.C.01 RFID incident identification and management processes1
11.6.70.C.0111.6.70.C.01 Secure disposal procedures in RFID usage policy0
11.6.71.C.0111.6.71.C.01 RFID user awareness and training programme0
11.6.72.C.0111.6.72.C.01 Class 3, 4 and 5 RFID tags banned from secure spaces0
11.6.72.C.0211.6.72.C.02 RFID readers banned from secure spaces0
11.6.72.C.0311.6.72.C.03 Class 2 RFID tags kept out of secure spaces0
11.7.29.C.0111.7.29.C.01 Documented risk assessment before adopting RFID access cards0
11.7.29.C.0211.7.29.C.02 Access card risk assessment underpins security architecture0
11.7.30.C.0111.7.30.C.01 Security architecture protecting access card databases and systems0
11.7.30.C.0211.7.30.C.02 NZISM access and cryptographic controls on access card systems0
11.7.30.C.0311.7.30.C.03 Network design elements for isolating access card systems1
11.7.31.C.0111.7.31.C.01 Access card usage policy developed and maintained0
11.7.31.C.0211.7.31.C.02 Access cards included in security policies and documentation0
11.7.32.C.0111.7.32.C.01 Tamper-resistant access card systems selected0
11.7.32.C.0211.7.32.C.02 Controls reducing access card tampering risk0
11.7.32.C.0311.7.32.C.03 Access card tag and reader placement to limit radiation0
11.7.32.C.0411.7.32.C.04 Additional physical controls chosen per the PSR0
11.7.33.C.0111.7.33.C.01 Access card cryptography per NZISM Chapter 170
11.7.33.C.0211.7.33.C.02 Encrypt data before writing to access cards0
11.7.33.C.0311.7.33.C.03 Secure Access Modules in card systems0
11.7.34.C.0111.7.34.C.01 Access card incident identification and management processes1
11.7.35.C.0111.7.35.C.01 Secure disposal procedures in access card usage policy1
11.8.10.C.0111.8.10.C.01 Supervised or cleared maintenance of MFDs in classified areas0
11.8.10.C.0211.8.10.C.02 Disposal of removed storage, drums and chipped cartridges per Chapter 131
11.8.10.C.0311.8.10.C.03 Toner cartridge memory chips removed and disposed per Chapter 131
11.8.10.C.0411.8.10.C.04 Supervised or cleared MFD maintenance at all classifications0
11.8.10.C.0511.8.10.C.05 Recommended Chapter 13 disposal of removed MFD components1
11.8.11.C.0111.8.11.C.01 Supervised or cleared use of MFD USB capability0
11.8.11.C.0211.8.11.C.02 Recommended supervision of MFD USB use at all classifications0
11.8.12.C.0111.8.12.C.01 Decommissioning MFD components holding data per Chapter 131
11.8.12.C.0211.8.12.C.02 Recommended Chapter 13 disposal of data-bearing MFD components1
11.8.13.C.0111.8.13.C.01 Central logging of MFD printing, scanning and copying0
11.8.3.C.0111.8.3.C.01 Policy for MFDs, network printers and fax machines0
11.8.4.C.0111.8.4.C.01 Encryption of classified fax messages over unsecured networks1
11.8.4.C.0211.8.4.C.02 Separate devices for classified and RESTRICTED-or-lower fax traffic0
11.8.5.C.0111.8.5.C.01 Sender arrangements for fax collection and non-arrival notice0
11.8.6.C.0111.8.6.C.01 No direct MFD to telephone network connection below network classification1
11.8.6.C.0211.8.6.C.02 Avoid direct MFD telephone connections at all classifications1
11.8.7.C.0111.8.7.C.01 Identification, authentication, audit and gateway filtering for networked MFDs1
11.8.8.C.0111.8.8.C.01 Networked MFDs not used for documents above network classification0
11.8.9.C.0111.8.9.C.01 MFDs and fax machines placed where use is observable0
12.1.30.C.0112.1.30.C.01 Mandatory preference order for evaluated products1
12.1.30.C.0212.1.30.C.02 Justify and accept risk for in-evaluation products0
12.1.30.C.0312.1.30.C.03 Preferred ranking when selecting evaluated products1
12.1.31.C.0112.1.31.C.01 Evaluated scope must cover required security functions0
12.1.32.C.0112.1.32.C.01 Check consumer guides for product requirements0
12.1.32.C.0212.1.32.C.02 Comply with consumer guide product requirements0
12.1.32.C.0312.1.32.C.03 Consult GCSB before buying high assurance products0
12.1.33.C.0112.1.33.C.01 Verify integrity and test non-evaluated software1
12.1.34.C.0112.1.34.C.01 Follow GCSB delivery procedures for high assurance products0
12.1.34.C.0212.1.34.C.02 Deliver products per documented delivery procedures0
12.1.35.C.0112.1.35.C.01 Check non-evaluated deliveries for tampering1
12.1.36.C.0112.1.36.C.01 Leasing agreements address maintenance and sanitisation1
12.1.37.C.0112.1.37.C.01 Prefer developers committed to ongoing assurance0
12.2.5.C.0112.2.5.C.01 Operate high assurance products per product policy0
12.2.5.C.0212.2.5.C.02 Configure evaluated products per evaluation documentation0
12.2.6.C.0112.2.6.C.01 Risk assess unevaluated product configurations1
12.2.6.C.0212.2.6.C.02 No unevaluated configurations for high assurance products0
12.3.4.C.0112.3.4.C.01 Classify IT equipment by highest approved information1
12.3.5.C.0112.3.5.C.01 Label classified-capable equipment with protective markings1
12.3.5.C.0212.3.5.C.02 Label data centre equipment with asset and classification0
12.3.6.C.0112.3.6.C.01 No non-essential labels on high assurance products0
12.3.7.C.0112.3.7.C.01 Get GCSB authorisation before labelling HACE0
12.4.3.C.0112.4.3.C.01 Monitor sources for vulnerabilities and patches0
12.4.4.C.0112.4.4.C.01 Apply critical patches within two days0
12.4.4.C.0212.4.4.C.02 Maintain a patch management strategy with testing0
12.4.4.C.0312.4.4.C.03 No patching high assurance products without GCSB approval0
12.4.4.C.0412.4.4.C.04 Apply critical patches preferably within two days0
12.4.4.C.0512.4.4.C.05 Apply non-critical patches promptly0
12.4.4.C.0612.4.4.C.06 Use vendor recommended patch processes0
12.4.5.C.0112.4.5.C.01 Compensating controls where patches are unavailable1
12.4.6.C.0112.4.6.C.01 Verify integrity and authenticity of firmware updates0
12.4.7.C.0112.4.7.C.01 Assess risk of unsupported products0
12.5.3.C.0112.5.3.C.01 GCSB approval before repairing high assurance products0
12.5.3.C.0212.5.3.C.02 On-site repair by cleared technicians0
12.5.4.C.0112.5.4.C.01 Escort requirements for uncleared technicians1
12.5.4.C.0212.5.4.C.02 Sanitise equipment before uncleared technician work0
12.5.4.C.0312.5.4.C.03 Adequate escort to technician ratio0
12.5.4.C.0412.5.4.C.04 Escort familiar with the product being repaired0
12.5.5.C.0112.5.5.C.01 Protect equipment during off-site repair1
12.5.6.C.0112.5.6.C.01 Off-site repairs follow destination area classification1
12.5.6.C.0212.5.6.C.02 Inspect equipment returned to secure areas0
12.6.10.C.0112.6.10.C.01 Redeploy or dispose of monitors per NZISM guidance1
12.6.4.C.0112.6.4.C.01 Sanitise or destroy equipment before disposal0
12.6.4.C.0212.6.4.C.02 Return unsanitisable NZEO equipment to New Zealand0
12.6.5.C.0112.6.5.C.01 Documented IT equipment disposal process0
12.6.5.C.0212.6.5.C.02 GCSB requirements for high assurance product disposal0
12.6.5.C.0312.6.5.C.03 GCSB requirements for HACE disposal0
12.6.5.C.0412.6.5.C.04 GCSB requirements for TEMPEST or non-functional equipment disposal0
12.6.5.C.0512.6.5.C.05 Sanitise and authorise disposal to public domain0
12.6.6.C.0112.6.6.C.01 Print three random-text pages to sanitise drums1
12.6.6.C.0212.6.6.C.02 Sanitise printer and copier drums before disposal1
12.6.7.C.0112.6.7.C.01 Destroy drums that cannot be sanitised0
12.6.7.C.0212.6.7.C.02 Destroy unsanitisable printer cartridges and drums0
12.6.8.C.0112.6.8.C.01 Inspect screens for burn-in before disposal1
12.6.9.C.0112.6.9.C.01 Sanitise or destroy screens with burn-in1
12.7.14.C.0112.7.14.C.01 Include supply chain risk in enterprise risk management0
12.7.14.C.0212.7.14.C.02 Continuously monitor supply chain risks0
12.7.14.C.0312.7.14.C.03 Follow the Government Rules of Procurement0
12.7.15.C.0112.7.15.C.01 Tenderers disclose export restrictions and supply chain compliance1
12.7.15.C.0212.7.15.C.02 Assess contractor ability to protect information0
12.7.16.C.0112.7.16.C.01 Contractual safeguarding obligations for all contractors1
12.7.16.C.0212.7.16.C.02 Include information safeguarding in contracts0
12.7.16.C.0312.7.16.C.03 Reject unreliable or previously breaching contractors1
12.7.17.C.0112.7.17.C.01 Supply chain changes preserve continuity of supply0
12.7.18.C.0112.7.18.C.01 Suppliers must provide product provenance0
12.7.18.C.0212.7.18.C.02 Request provenance of products and equipment0
12.7.19.C.0112.7.19.C.01 Validate equipment security against requirements0
12.7.19.C.0212.7.19.C.02 Mitigate identified security deficiencies0
12.7.20.C.0112.7.20.C.01 Consult GCSB on pre-installation security testing0
12.7.20.C.0212.7.20.C.02 Inspect equipment on receipt for tampering0
12.7.20.C.0312.7.20.C.03 Inspect and test operation before installation0
12.7.20.C.0412.7.20.C.04 Verify installation before operational use0
12.7.20.C.0512.7.20.C.05 Malware check code needed by equipment1
12.7.21.C.0112.7.21.C.01 Secure long-term servicing for critical equipment1
13.1.10.C.0113.1.10.C.01 Proportionate risk assessment before migration or decommissioning1
13.1.10.C.0213.1.10.C.02 Required elements of the migration risk assessment1
13.1.10.C.0313.1.10.C.03 Consider a Privacy Impact Assessment for migration0
13.1.10.C.0413.1.10.C.04 Identify and terminate related service and legal agreements0
13.1.11.C.0113.1.11.C.01 Contents of the system decommissioning plan1
13.1.12.C.0113.1.12.C.01 Identify retention policies and laws before archiving0
13.1.12.C.0213.1.12.C.02 Archive adequate system documentation on decommissioning0
13.1.12.C.0313.1.12.C.03 Archive software and data needed for recovery0
13.1.13.C.0113.1.13.C.01 Accreditation Authority confirms IA compliance at decommissioning0
13.1.13.C.0213.1.13.C.02 Accreditation Authority confirms secure media disposal0
13.1.13.C.0313.1.13.C.03 Accreditation Authority confirms asset register updates0
13.1.13.C.0413.1.13.C.04 Issue a Security Decommissioning Compliance Certificate0
13.1.14.C.0113.1.14.C.01 Conduct a post-decommissioning review0
13.1.9.C.0113.1.9.C.01 Policy for secure end-of-life system decommissioning1
13.2.10.C.0113.2.10.C.01 Conditions for reclassifying media downward1
13.2.11.C.0113.2.11.C.01 Triggers for reclassifying media to a higher level0
13.2.12.C.0113.2.12.C.01 Label classified media with maximum classification and endorsements0
13.2.12.C.0213.2.12.C.02 Classified media classification visually identifiable0
13.2.12.C.0313.2.12.C.03 Document and train on non-textual media marking schemes0
13.2.12.C.0413.2.12.C.04 Label all media with classification and endorsements0
13.2.13.C.0113.2.13.C.01 Warning notice on sanitised and reclassified media1
13.2.14.C.0113.2.14.C.01 Register classified media with unique identifiers0
13.2.14.C.0213.2.14.C.02 Register all media with unique identifiers0
13.2.6.C.0113.2.6.C.01 Documented media reclassification and declassification procedures0
13.2.7.C.0113.2.7.C.01 Classify media at highest stored data classification0
13.2.8.C.0113.2.8.C.01 Media connected to higher systems takes the higher classification0
13.2.9.C.0113.2.9.C.01 Conditions for classifying media below its connected system1
13.3.10.C.0113.3.10.C.01 External-interface media in TOP SECRET areas needs approval0
13.3.4.C.0113.3.4.C.01 No classified media on lower-classified systems0
13.3.5.C.0113.3.5.C.01 Media storage meets PSR physical requirements1
13.3.6.C.0113.3.6.C.01 Disable autorun for connectable devices and media0
13.3.6.C.0213.3.6.C.02 Block unauthorised media from connecting to systems1
13.3.6.C.0313.3.6.C.03 Prevent unintended writes to connected writable media0
13.3.7.C.0113.3.7.C.01 Disable FireWire interfaces on classified systems0
13.3.7.C.0213.3.7.C.02 Disable FireWire interfaces on all systems0
13.3.8.C.0113.3.8.C.01 Media transfer processes meet PSR transfer requirements0
13.3.8.C.0213.3.8.C.02 Encrypt media data before transfer to another location0
13.3.9.C.0113.3.9.C.01 Log cross-classification data transfers0
13.3.9.C.0213.3.9.C.02 Avoid rewriteable media for manual cross-domain transfers0
13.4.10.C.0113.4.10.C.01 Destroy media types that cannot be sanitised1
13.4.11.C.0113.4.11.C.01 Method for sanitising volatile media1
13.4.12.C.0113.4.12.C.01 Post-sanitisation classification of volatile media1
13.4.13.C.0113.4.13.C.01 Overwrite passes for non-volatile magnetic media1
13.4.13.C.0213.4.13.C.02 Boot from separate media when sanitising0
13.4.13.C.0313.4.13.C.03 Reset HPA and DCO before overwriting disks0
13.4.13.C.0413.4.13.C.04 Attempt to overwrite the growth defects table0
13.4.13.C.0513.4.13.C.05 Prefer ATA Secure Erase over block overwriting0
13.4.14.C.0113.4.14.C.01 Post-sanitisation classification of magnetic media1
13.4.15.C.0113.4.15.C.01 Sanitising EPROM media1
13.4.16.C.0113.4.16.C.01 Sanitising EEPROM media0
13.4.17.C.0113.4.17.C.01 Post-sanitisation classification of EPROM and EEPROM1
13.4.18.C.0113.4.18.C.01 Sanitising flash memory media0
13.4.19.C.0113.4.19.C.01 Post-sanitisation classification of flash memory1
13.4.19.C.0213.4.19.C.02 Destroy items without known sanitisation procedures0
13.4.20.C.0113.4.20.C.01 Destroy solid state drives before disposal0
13.4.20.C.0213.4.20.C.02 ATA Secure Erase SSDs before redeployment0
13.4.20.C.0313.4.20.C.03 No redeploying classified SSDs to lower environments0
13.4.21.C.0113.4.21.C.01 Treat hybrid drives as solid state drives0
13.4.22.C.0113.4.22.C.01 Sanitise before reuse at same or higher classification0
13.4.23.C.0113.4.23.C.01 Verify sanitisation with a different product0
13.4.9.C.0113.4.9.C.01 Documented media and IT equipment sanitisation procedures0
13.5.22.C.0113.5.22.C.01 Documented media and IT equipment destruction procedures0
13.5.23.C.0113.5.23.C.01 Approved destruction methods by media type1
13.5.24.C.0113.5.24.C.01 Use approved destruction equipment, facilities and methods0
13.5.24.C.0213.5.24.C.02 Use an approved facility when lacking own equipment0
13.5.24.C.0313.5.24.C.03 Non-approved facilities need WEEE-rated incineration and licensed operator1
13.5.24.C.0413.5.24.C.04 Safe WEEE handling at non-approved facilities0
13.5.25.C.0113.5.25.C.01 Treatment of destruction waste by particle size1
13.5.26.C.0113.5.26.C.01 Degausser field strength matches media coercivity0
13.5.26.C.0213.5.26.C.02 Degausser evaluated for media magnetic orientation0
13.5.26.C.0313.5.26.C.03 Follow manufacturer and GCSB degausser directions0
13.5.27.C.0113.5.27.C.01 Cleared supervisor for media destruction0
13.5.27.C.0213.5.27.C.02 Duties of personnel supervising destruction0
13.5.27.C.0313.5.27.C.03 Destruction Register contents1
13.5.28.C.0113.5.28.C.01 Two cleared supervisors for accountable material destruction0
13.5.28.C.0213.5.28.C.02 Duties when supervising accountable material destruction1
13.5.29.C.0113.5.29.C.01 No outsourcing supervision of TOP SECRET or NZEO destruction1
13.5.29.C.0213.5.29.C.02 Outsourced destruction uses approved commercial facility0
13.5.30.C.0113.5.30.C.01 Sanitise before transport to offsite destruction0
13.6.10.C.0113.6.10.C.01 NZEO media sanitised then redeployed or destroyed0
13.6.10.C.0213.6.10.C.02 Approved destruction facility for NZEO disposal0
13.6.10.C.0313.6.10.C.03 NZEO media never e-recycled or sold0
13.6.11.C.0113.6.11.C.01 Agency-run destruction facilities need Director-General GCSB approval0
13.6.12.C.0113.6.12.C.01 Use approved secure destruction facility for media0
13.6.6.C.0113.6.6.C.01 Declassify media before public-domain disposal0
13.6.6.C.0213.6.6.C.02 Destroy items that cannot be sanitised or declassified0
13.6.7.C.0113.6.7.C.01 Documented media and IT equipment disposal procedures0
13.6.8.C.0113.6.8.C.01 Conditions for declassifying media1
13.6.9.C.0113.6.9.C.01 Dispose of media without revealing prior classification0
14.1.10.C.0114.1.10.C.01 Remove default accounts and passwords on classified SOEs1
14.1.10.C.0214.1.10.C.02 Remove default accounts and passwords on all SOEs0
14.1.11.C.0114.1.11.C.01 Separate high-risk servers exposed to public networks1
14.1.12.C.0114.1.12.C.01 Characterise critical and high-risk servers1

Tell me when New Zealand Information Security Manual (NZISM) files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What an auditor will ask you to produce

The artefacts named on the failure modes this framework speaks to.

  • OT asset inventory
  • Zone and conduit diagram
  • Patch register
  • Remote access policy
  • Infrastructure/virtualization security policy
  • Network segmentation + defense architecture
  • Administrative Court review procedure
  • DSS investigation response plan
  • Sanctions exposure register (EUR 10M-20M + 2-4% turnover)
  • Liechtenstein Penal Code Articles 188 + 195 awareness

How programmes fail on this

Failure modes named by this framework and others. Each opens the full record.

What this page is

A control-level reference for New Zealand Information Security Manual (NZISM), drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition