International

ISO/IEC 17020:2012 Requirements for the operation of various types of bodies performing inspection

117 controls. 4 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

117 controls 4 frameworks share controls with it International verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

Every control

CodeControlAlso in
4.1.1Inspection undertaken impartially1
4.1.2Responsibility for impartiality and freedom from pressure1
4.1.3Ongoing identification of risks to impartiality2
4.1.4Demonstrating how identified risks are eliminated or minimised0
4.1.5Top management commitment to impartiality0
4.1.6Independence to the extent required: Types A, B and C1
4.2.1Legally enforceable confidentiality and notice of public information3
4.2.2Notifying the client when confidential information is released0
4.2.3Information from other sources treated as confidential0
5.1.1Legal entity or defined part of one2
5.1.2Identifiable within a wider legal entity0
5.1.3Documentation of the activities for which it is competent0
5.1.4Provision for liabilities0
5.1.5Documented contractual conditions0
5.2.1Structured and managed to safeguard impartiality1
5.2.2Organised to maintain inspection capability0
5.2.3Defined and documented responsibilities and reporting structure0
5.2.4Relationship between inspection and other activities defined0
5.2.5Technical manager with overall responsibility1
5.2.6Named deputies for technical managers0
5.2.7Job descriptions for every position category0
6.1.1Defined and documented competence requirements0
6.1.10Records of monitoring, training, experience and authorisation0
6.1.11Remuneration not influencing results0
6.1.12All personnel who could influence inspection act impartially0
6.1.13Confidentiality by all personnel including subcontractors1
6.1.2Sufficient competent persons employed or contracted3
6.1.3Qualifications, knowledge and understanding of deviations1
6.1.4Duties, responsibilities and authorities made clear0
6.1.5Documented procedures for selecting, training, authorising and monitoring0
6.1.6Training stages: induction, mentored period, continuing training2
6.1.7Training tailored to the person and to monitoring results0
6.1.8Monitoring by personnel familiar with the methods1
6.1.9On-site observation of each inspector1
6.2.1Suitable and adequate facilities and equipment1
6.2.10Traceable reference materials0
6.2.11Supplier selection, verification of incoming goods and storage0
6.2.12Assessment of stored items for deterioration0
6.2.13Computers and automated equipment1
6.2.14Defective equipment removed and effects examined1
6.2.15Equipment information recorded0
6.2.2Rules for access to and use of facilities and equipment0
6.2.3Continued suitability of facilities and equipment0
6.2.4Equipment with significant influence defined and identified0
6.2.5Maintenance to documented procedures0
6.2.6Calibration before service and to a programme0
6.2.7Traceability of measurements1
6.2.8Reference standards used only for calibration0
6.2.9In-service checks between recalibrations0
6.3.1Subcontracting only to demonstrably competent subcontractors1
6.3.2Client informed of intention to subcontract0
6.3.3Responsibility for conformity determination stays with the body0
6.3.4Records of subcontractor investigation and a register0
7.1.1Methods and procedures defined by the requirements, or developed1
7.1.2Documented instructions for planning, sampling and techniques; statistical knowledge1
7.1.3Non-standard methods appropriate and fully documented1
7.1.4Documents and reference data up to date and available0
7.1.5Contract or work order control1
7.1.6Verifying information supplied by others0
7.1.7Timely recording of observations and data0
7.1.8Checks on calculations and data transfers0
7.1.9Documented instructions for safe inspection0
7.2.1Unique identification of items and samples0
7.2.2Establishing whether the item has been prepared0
7.2.3Recording abnormalities and contacting the client in case of doubt1
7.2.4Avoiding deterioration or damage to items0
7.3.1Record system demonstrating fulfilment of procedures0
7.3.2Reports and certificates traceable to the inspector0
7.4.1Retrievable report or certificate for all work0
7.4.2Mandatory content of reports and certificates1
7.4.3Certificates without results only with a traceable report0
7.4.4Correct, accurate and clear reporting; subcontracted results identified0
7.4.5Corrections and amendments after issue0
7.5.1Documented process for complaints and appeals0
7.5.2Handling process available to interested parties0
7.5.3Confirming responsibility and dealing with the complaint0
7.5.4Responsibility for all decisions in the handling process0
7.5.5Appeals without discriminatory actions0
7.6.1Elements of the complaints and appeals process1
7.6.2Gathering and verifying information to validate0
7.6.3Acknowledgement, progress reports and outcome0
7.6.4Decision by persons not involved in the original inspection1
7.6.5Formal notice of the end of the process0
8.1.1Management system under Option A or Option B0
8.1.2Option A content1
8.1.3Option B: ISO 9001-based system0
8.2.1Policies and objectives established and implemented at all levels0
8.2.2Evidence of top management commitment0
8.2.3Appointed management representative1
8.2.4All documentation and records included or linked0
8.2.5Personnel access to applicable documentation0
8.3.1Procedures to control documents0
8.3.2Document control elements1
8.4.1Controls for records0
8.4.2Retention consistent with obligations and confidentiality0
8.5.1.1Management review procedures0
8.5.1.2Review at least annually or rolling within twelve months0
8.5.1.3Records of reviews0
8.5.2Management review inputs1
8.5.3Management review outputs0
8.6.1Internal audit procedures0
8.6.2Planned audit programme0
8.6.3Periodic audits covering all procedures0
8.6.4Audit frequency at least every twelve months0
8.6.5Audit conduct: competence, independence, communication, action, documentation1
8.7.1Procedures for identifying and managing nonconformities1
8.7.2Eliminating causes to prevent recurrence0
8.7.3Corrective actions proportionate to impact0
8.7.4Corrective action procedure elements1
8.8.1Procedures for preventive action0
8.8.2Preventive actions proportionate to probable impact0
8.8.3Preventive action procedure elements1
A.1Type A: third-party inspection body independence1
A.2Type B: in-house inspection body independence0
A.3Type C: safeguards for segregation of responsibilities0
BAnnex B: Optional report and certificate elements (informative)0
statusStatus: second edition 2012, succeeded by the 2026 third edition0

Tell me when ISO/IEC 17020:2012 Requirements for the operation of various types of bodies performing inspection files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for ISO/IEC 17020:2012 Requirements for the operation of various types of bodies performing inspection, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition