Global (ETSI deliverables)

ETSI Industry Specification Group (ISG) on Quantum Key Distribution (QKD)

112 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

112 controls 0 frameworks share controls with it Global (ETSI deliverables) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
ETSI-ISG-QKD-ComponentsComponent characterisation (GS QKD 011, GS QKD 012)0
ETSI-ISG-QKD-ConformanceImplementation Conformance Statement against the ISG QKD series0
ETSI-ISG-QKD-KDAPIKey delivery API (GS QKD 014)0
ETSI-ISG-QKD-NetIntegrationNetwork integration (GS QKD 015, GS QKD 018)0
ETSI-ISG-QKD-SecurityEvalSecurity proofs and evaluation (GS QKD 005, GS QKD 008, GS QKD 016)0
ETSI-ISG-QKD-SeriesETSI ISG QKD Group Specifications and Group Reports0
ETSI-ISG-QKD-UseCasesQKD use cases and requirements (GS QKD 002, GR QKD 003)0
004GS QKD 004 V2.1.1 (2020-08): application interface0
004.6.1A004.6.1A Key manager functions OPEN_CONNECT, GET_KEY and CLOSE0
004.6.1B004.6.1B Parameters: key stream identifier, QoS, metadata and status codes0
004.6.2004.6.2 Key association sequences, timeouts and application discovery in a network0
005GS QKD 005 V1.1.1 (2010-12): security proofs0
005.4.1005.4.1 Probabilistic security statement with a quoted security parameter0
005.4.3005.4.3 Scientific proof plus implementation verification0
005.4.4005.4.4 Stated assumptions on devices and on the adversary0
005.4.5005.4.5 Physical model specified, verified and deviations quantified0
005.4.5.1005.4.5.1 Source assumptions: phase randomisation, photon statistics, modes, isolation0
005.4.5.2005.4.5.2 Detection unit assumptions: mode response, equal efficiencies, isolation0
005.4.7005.4.7 Classical post-processing fully specified and consistent with the proof0
005.4.7.6005.4.7.6 Authentication of the public channel and common protocol mistakes0
008GS QKD 008 V1.1.1 (2010-12): QKD module security specification0
008.4.10008.4.10 Self-tests: pre-operational, conditional and critical functions0
008.4.11.1008.4.11.1 Life-cycle assurance: configuration management, design, finite state model and development0
008.4.11.5008.4.11.5 Vendor testing, secure delivery and guidance documents0
008.4.12008.4.12 Mitigation of other attacks0
008.4.2008.4.2 Module specification, cryptographic boundary and approved mode0
008.4.2.3008.4.2.3 Multiple approved modes, degraded functionality and security strength0
008.4.3008.4.3 Physical ports and logical interfaces0
008.4.4.1008.4.4.1 Roles and two-factor identity-based operator authentication0
008.4.4.3008.4.4.3 Services, bypass capability and external software loading0
008.4.5008.4.5 Software security and integrity protection0
008.4.6008.4.6 Operational environment and operating system controls0
008.4.7.1008.4.7.1 Physical security: tamper evidence, response and opacity0
008.4.7.2008.4.7.2 Embedded and standalone embodiments: enclosures, locks and tamper envelopes0
008.4.7.4008.4.7.4 Environmental failure protection and testing0
008.4.8008.4.8 Protection against non-invasive attacks0
008.4.9008.4.9 SSP protection, random bit generation, generation and establishment0
008.4.9.4008.4.9.4 SSP entry and output, storage and zeroisation0
008.B008.B Module Security Policy and documentation set0
011GS QKD 011 V1.1.1 (2016-05): component characterisation of optical components for QKD systems0
011.10011.10 Stability of mean optical power0
011.11011.11 Poissonian nature of emitted pulses0
011.12011.12 Source emission temporal profile, temporal profile and timing jitter0
011.13011.13 Source wavelength and spectral linewidth0
011.14011.14 Detector gate repetition rate0
011.15011.15 Dark count, after-pulse probability and detection efficiency0
011.16011.16 Detection efficiency linearity factor0
011.17011.17 Detection efficiency range due to polarisation0
011.18011.18 Dead time, recovery, partial recovery and reset times0
011.19011.19 Detector signal jitter and detection efficiency profile0
011.20011.20 Spectral responsivity0
011.4.3011.4.3 Weak laser pulse sources: encoding, indistinguishability and calibration0
011.5011.5 Measurement conditions: SI traceability and reporting0
011.6011.6 Clock frequency and its variation0
011.7011.7 Output optical pulse repetition rate0
011.8011.8 Mean photon number0
011.9011.9 Mean source power0
012GS QKD 012 V1.1.1 (2019-02): device and communication channel parameters for QKD deployment0
012.4012.4 Quantum, synchronisation and distillation channels0
012.5012.5 Deployment architecture choice0
012.7.2012.7.2 Network parameters the network operator communicates0
012.7.3012.7.3 QKD parameters the QKD operator communicates0
014.COMMON014.COMMON Key delivery over mutually authenticated HTTPS0
014.GETKEY014.GETKEY Get key0
014.GETKEYIDS014.GETKEYIDS Get key with key IDs0
014.STATUS014.STATUS Get status0
015GS QKD 015 V2.1.1 (2022-04): control interface for software-defined QKD networks0
015.4.2015.4.2 SD-QKD node requirements0
015.4.4015.4.4 Node capabilities and QKD interface description0
015.4.5015.4.5 Key association links tracked, isolated and kept inside the perimeter0
015.4.7015.4.7 Notifications from node to controller0
015.5.2015.5.2 Application registration with QoS in node and controller0
015.5.3015.5.3 Dynamic creation of physical and virtual links0
015.6015.6 Installation security, protocols and the normative YANG model0
016.EAL016.EAL Assurance level EAL4 augmented with AVA_VAN.5 and ALC_DVS.20
016.OBJ016.OBJ Security objectives for the TOE and its environment0
016.PKG.1016.PKG.1 Package: trusted user interfaces with authentication0
016.PKG.2016.PKG.2 Package: TOE self-protection0
016.PKG.3016.PKG.3 Package: provisioning and re-personalisation after delivery0
016.PKG.4016.PKG.4 Package: local authentication of users0
016.SFR.1016.SFR.1 User identification and management0
016.SFR.2016.SFR.2 Access control0
016.SFR.3016.SFR.3 Audit data0
016.SFR.4016.SFR.4 Reaching and preserving secure states0
016.SFR.5016.SFR.5 Authenticated classical channel of the QKD link0
016.SFR.6016.SFR.6 QKD key establishment (FCS_QKD.1)0
016.SFR.7016.SFR.7 Management of the TSF0
016.SPD016.SPD Security problem definition: threats, policies and assumptions0
018GS QKD 018 V1.1.1 (2022-04): orchestration interface for software-defined QKD networks0
018.5.1018.5.1 Topology discovery exposed to the orchestrator0
018.5.2018.5.2 Network status and key resource inventory0
018.5.3018.5.3 End-to-end service status0
018.5.4018.5.4 Service provisioning with candidate paths and deployment0
018.5.5018.5.5 Notifications and performance thresholds for the orchestrator0
018.7018.7 Orchestration interface security and the normative YANG modules0
020GS QKD 020 V1.1.1 (2026-06): REST-based interoperable key management system API0
020.4.2A020.4.2A Asynchronous mode mandatory, synchronous mode optional0
020.4.2B020.4.2B Key association after errors: retain, retry or void0
020.4.3020.4.3 Mutually authenticated HTTPS with TLS 1.30
020.4.4020.4.4 Use only between co-located KMEs in a secure operational environment0
020.4.5020.4.5 Vendor extensions: naming, mandatory and optional handling0
020.4.6020.4.6 SAE identifiers unique, bounded and URI-safe0
020.5.2020.5.2 Version discovery endpoint0
020.6.2020.6.2 ext_keys: passing keys to another KME0
020.6.3020.6.3 ext_keys/ack: acknowledging the status of keys0
020.6.4020.6.4 ext_keys/void: discarding keys and guarding against mass voiding0
APIGS QKD 014 V1.1.1 (2019-02): REST-based key delivery API0
GR-DRAFTSUse cases, Group Reports and drafts: GS QKD 002, GR QKD 003, GR QKD 007, GS QKD 010 draft, DGS/QKD-013, DGR/QKD-017, DGR/QKD-019, DGS/QKD-021 to 0240
ISGETSI ISG QKD: the group, its deliverable series and its status0
NETNetwork, key management and control interfaces (GS QKD 004, 015, 018, 020)0
PPGS QKD 016 V2.1.1 (2024-01): Common Criteria Protection Profile for a pair of prepare-and-measure QKD modules0
SECSecurity proofs, module security, component characterisation and deployment parameters (GS QKD 005, 008, 011, 012)0

Tell me when ETSI Industry Specification Group (ISG) on Quantum Key Distribution (QKD) files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for ETSI Industry Specification Group (ISG) on Quantum Key Distribution (QKD), drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition