ATT1 | Standards referenced | 0 |
C0 | Status of the Part B conditions and the work practices | 0 |
C1 | Work not permitted in the facility | 0 |
C10 | Telling people their admission conditions | 0 |
C11 | Submissions on exclusion or conditional access | 0 |
C12 | Authority to admit and exclude where the holder is not the owner | 0 |
C13 | Entry for the Regulator | 0 |
C14 | Pest prevention strategy | 0 |
C15 | Inspection at least every 12 months | 0 |
C16 | Keeping the containment equipment requirements met | 0 |
C17 | Keeping the LWTS requirements met | 0 |
C18 | Before structural changes | 0 |
C19 | Inspection before a suspension is lifted | 0 |
C2 | Keeping the facility and fittings requirements met | 0 |
C20 | No dealings until the suspension is lifted | 0 |
C21 | Integrity testing of reusable closed systems | 0 |
C22 | Reusable closed system that fails its test | 0 |
C23 | Integrity testing of single-use components | 0 |
C24 | Single-use component that fails its test | 0 |
C25 | Monitoring and calibrating heat-based decontamination equipment | 0 |
C26 | Monitoring and inspecting the LWTS | 0 |
C27 | Testing biological safety cabinets | 0 |
C28 | Cabinet that fails its test | 0 |
C29 | Annual testing of testable backflow devices | 0 |
C3 | Signs at each entry point | 0 |
C30 | Faulty backflow device | 0 |
C31 | Training before dealings | 0 |
C32 | Content of the training | 0 |
C33 | Doors closed and locked | 0 |
C34 | Windows closed | 0 |
C35 | Gloves off and hands decontaminated before leaving | 0 |
C36 | Personal protective equipment | 0 |
C37 | Removing protective equipment before leaving | 0 |
C38 | Aerosol-producing work in a cabinet | 0 |
C39 | Installing and using cabinets | 0 |
C4 | Disinfectants available and labelled | 0 |
C40 | Sampling, additions and transfers without release | 0 |
C41 | Process waste decontamination method lodged first | 0 |
C42 | Decontamination without release | 0 |
C43 | In situ decontamination of closed systems | 0 |
C44 | Trained people decontaminate | 0 |
C45 | Decontaminating benches, surfaces and equipment after dealings | 0 |
C46 | Decontaminating before maintenance | 0 |
C47 | Decontaminating liquid and solid waste | 0 |
C48 | Decontaminating filters before disposal | 0 |
C49 | GMOs made non-viable before disposal | 0 |
C5 | Keeping the facility management requirements met | 0 |
C50 | Decontaminating equipment before it leaves | 0 |
C51 | Removing and treating contaminated protective equipment | 0 |
C52 | Decontamination methods | 0 |
C53 | Chemical treatment effective against the GMO | 0 |
C54 | Validated time and temperature for heat treatment | 0 |
C55 | Telling processed loads from unprocessed | 0 |
C56 | Decontamination equipment status labelled | 0 |
C57 | Defective decontamination equipment | 0 |
C58 | Decontaminating cabinets | 0 |
C59 | Spill inside the facility | 0 |
C6 | Access limited to authorised persons | 0 |
C60 | Spill outside the facility | 0 |
C61 | LWTS failure causing a spill outside the work area | 0 |
C62 | Labelling GMO containers | 0 |
C63 | No removal of over 25 litres without permission | 0 |
C64 | Removing 25 litres or less | 0 |
C65 | Storing 25 litres or less outside the facility | 0 |
C66 | Removing non-GMOs while dealings are under way | 0 |
C67 | Incidents reported to the Regulator | 0 |
C68 | Records kept for five years or as long as relevant | 0 |
C7 | Supervising non-dealing entrants | 0 |
C8 | Excluding a person on the Regulator's direction | 0 |
C9 | Conditional admission on the Regulator's direction | 0 |
R0 | Purpose of the guidelines and how certification works | 0 |
R1 | Enclosable and securable work area | 0 |
R10 | Risk assessment for other reticulated services | 0 |
R11 | Backflow measures where the assessment calls for them | 0 |
R12 | Documenting the backflow assessment | 0 |
R13 | Spill procedures and means for the work area | 0 |
R14 | Closed systems for large scale cultures | 0 |
R15 | Closed systems designed to prevent release | 0 |
R16 | Single-use components testable for leaks | 0 |
R17 | Securing and removing large bioreactor bags | 0 |
R18 | Decontaminating single-use components without release | 0 |
R19 | Decontaminating reusable closed systems without release | 0 |
R2 | Openings filtered or screened against animals | 0 |
R20 | Reusable closed systems testable for integrity | 0 |
R21 | Respiratory protection risk assessment | 0 |
R22 | Biological safety cabinet where aerosols are produced | 0 |
R23 | Other processing equipment able to contain GMOs | 0 |
R24 | Secondary containment for the closed system | 0 |
R25 | Liquid waste treatment system located outside the work area | 0 |
R26 | Ability to meet the conditions of certification | 0 |
R27 | Documents lodged with the application | 0 |
R3 | Smooth, water-proof, cleanable and resistant surfaces | 0 |
R4 | Open spaces reachable for decontamination | 0 |
R5 | Liquid effluent from sinks and floor drains | 0 |
R6 | Hands-free hand decontamination | 0 |
R7 | Emergency drench shower and eyewash | 0 |
R8 | Place for reusable protective clothing | 0 |
R9 | Backflow protection of the water supply | 0 |