Australia (all States and Territories, through their building legislation)

Australia National Construction Code 2025 Volume Two (Building Code of Australia, Class 1 and 10 Buildings)

60 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

60 controls 0 frameworks share controls with it Australia (all States and Territories, through their building legislation) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
A1Part A1 Interpreting the NCC (A1G1 to A1G4)0
A2G1-A2G4A2G1 to A2G4 Compliance pathways and documentation of Performance Solutions0
A3-A4Parts A3 and A4 State and Territory application and referenced documents0
A5G1-A5G3A5G1 to A5G3 Suitability of materials, products, forms of construction and designs, and the evidence for it0
A5G8-A5G9A5G8 and A5G9 Labelling of aluminium composite panels and NatHERS certificates0
A6-A7Parts A6 and A7 Building classification and united buildings0
H1-introPart H1 objectives, functional statements and Deemed-to-Satisfy entry (H1O1, H1F1, H1D1, H1D2)0
H1P1H1P1 Structural reliability and resistance0
H1P2H1P2 Buildings in flood areas0
H2-introPart H2 objective, functional statements and Deemed-to-Satisfy entry (H2O1, H2F1 to H2F3, H2D1)0
H2P1H2P1 Rainwater management0
H2P2H2P2 Weatherproofing0
H2P3H2P3 Rising damp0
H2P4H2P4 Drainage from swimming pools0
H3-introPart H3 objective, functional statements and Deemed-to-Satisfy entry (H3O1, H3F1, H3F2, H3D1)0
H3P1H3P1 Spread of fire0
H3P2H3P2 Automatic warning for occupants0
H4-introPart H4 objectives, functional statements and Deemed-to-Satisfy entry (H4O1 to H4O7, H4F1 to H4F7, H4D1)0
H4P1H4P1 Wet areas0
H4P2H4P2 Room heights0
H4P3H4P3 Personal hygiene and other facilities0
H4P4H4P4 Lighting0
H4P5H4P5 Ventilation0
H4P6H4P6 Sound insulation0
H4P7H4P7 Condensation and water vapour management0
H5-introPart H5 objective, functional statement and Deemed-to-Satisfy entry (H5O1, H5F1, H5D1)0
H5P1H5P1 Movement to and within a building0
H5P2H5P2 Fall prevention barriers0
H6-introPart H6 objective, functional statement, Deemed-to-Satisfy entry and Specifications 42 and 440
H6P1H6P1 Thermal performance0
H6P2H6P2 Energy usage0
H7-introPart H7 objectives, functional statements and Deemed-to-Satisfy entry (H7O1, H7F1 to H7F5, H7D1)0
H7P1H7P1 Swimming pool access0
H7P2H7P2 Swimming pool reticulation systems0
H7P3H7P3 Heating appliances0
H7P4H7P4 Buildings in alpine areas0
H7P5H7P5 Buildings in bushfire prone areas0
H7P6H7P6 Private bushfire shelters0
H8-introPart H8 objective, functional statement and Deemed-to-Satisfy entry (H8O1, H8F1, H8D1)0
H8P1H8P1 Livable housing design0
NSW-H1D4-H2P3New South Wales: NSW H2P3 rising damp and NSW H1D4(1) footings and slabs0
NSW-H6New South Wales: Part H6 and the energy specifications do not apply; NSW H1P1, A5G3 and A5G6 replaced0
NSW-OTHERNew South Wales: pools, bushfire, garage-top dwellings and Part H80
NT-H6Northern Territory: NT Part H6 energy efficiency (NT H6P1 and H6P2)0
QLD-H1P3Queensland: QLD H1P3 termite management measures0
QLD-OTHERQueensland: flood areas, timber species, pools and bushfire exemptions0
SA-H10P1South Australia: SA Part H10 access for people with a disability in developments of 20 or more dwellings0
SA-H2P3South Australia: SA H2P3 rising damp and SA H2D4 damp-proof courses0
SA-H5P3South Australia: SA H5P3 access for inspection and maintenance between buildings0
SA-H7-POOLSouth Australia: pool CPR signage and skimmer boxes (SA H7P1(2), SA H7D2(3) to (5))0
SA-H9P1South Australia: SA Part H9 water efficiency removed0
SA-OTHERSouth Australia: brush fences, wet area floors, bushfire attack levels and flood provisions0
SV-introHow the State and Territory schedules apply, and the ACT and Commonwealth schedules0
TAS-H7P2Tasmania: TAS H7P2 swimming pool recirculation, disinfection and filtration0
TAS-H7P3-H7P5Tasmania: TAS H7P3 heating appliance emissions and TAS H7P5 bushfire access and water0
TAS-OTHERTasmania: Part H6 replaced, condensation guide, Part H8 determination and PCA evidence0
VICVictoria: flood hazard definitions, gutters and downpipes, energy and rainwater tanks0
WA-H6-H10Western Australia: roofed outdoor areas, pool barriers, existing building energy note and eaves gutter changes (WA H3D7, WA H7D2, Part H6 note, WA Part H10)0
WA-H9Western Australia: WA Part H9 water use (WA H9P1 to H9P3)0
statusStatus, currency and adoption of NCC 2025 Volume Two0

Tell me when Australia National Construction Code 2025 Volume Two (Building Code of Australia, Class 1 and 10 Buildings) files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for Australia National Construction Code 2025 Volume Two (Building Code of Australia, Class 1 and 10 Buildings), drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition