Australia: national model (Commonwealth, NSW, Qld, SA, Tas, ACT, NT, WA adoptions; not Victoria)

Australia Model Work Health and Safety Regulations

281 controls. 3 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

281 controls 3 frameworks share controls with it Australia: national model (Commonwealth, NSW, Qld, SA, Tas, ACT, NT, WA adoptions; not Victoria) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

Every control

CodeControlAlso in
Appendix-introAppendix Jurisdictional notes0
Ch1-P1.2-P1.3Parts 1.2 and 1.3 Application and incorporated documents (rr 10 to 15)0
Ch1-introChapter 1 Preliminary: citation, definitions and meaning of supply (rr 1 to 9)0
Ch10-introChapter 10 Mines (rr 609 to 675) not included in the consolidation0
Ch11-P11.1-introPart 11.1 Review of decisions under the Regulations (rr 676 to 683)0
Ch11-P11.2-introPart 11.2 Exemptions: general, high risk work, MHF and engineered stone (rr 684 to 692, 694 to 698)0
Ch11-P11.3-introPart 11.3 Miscellaneous (rr 700 to 702)0
Ch11-P11.5-introParts 11.4 to 11.6 Transitional provisions: engineered stone and crane licences (rr 703 to 705)0
Ch4-P4.5-accreditationrr 115 to 123 and 128 to 141 Accreditation of assessors: grant, conditions, renewal, suspension, RTO agreements0
Ch4-P4.5-licensingrr 86 to 93, 95, 99 to 110 and 112 High risk work licence applications, decisions, conditions, renewal, suspension and cancellation0
Ch5-P5.1-introPart 5.1 application to plant and structures (rr 185 and 186)0
Ch5-P5.2-introPart 5.2 application: registrable plant and plant designs (r 227)0
Ch5-P5.3-Div3-introDivision 3 Plant design registration process (rr 248 to 263)0
Ch5-P5.3-Div4-introDivision 4 Item registration and renewal process (rr 264 to 272, 274, 276 to 280)0
Ch5-P5.3-Div5-6-introDivisions 5 and 6 Amending, replacing and cancelling registrations (rr 281, 283 to 288D)0
Ch6-P6.1-introPart 6.1 Definitions: construction work, structure, high risk construction work, construction project, principal contractor (rr 289 to 293)0
Ch6-P6.4-introPart 6.4 application to construction projects (r 307)0
Ch6-P6.5-Div2-introDivision 2 Issue, replacement and cancellation of general construction induction training cards (rr 319 to 325)0
Ch7-P7.1-Div8-introAuthorisation of prohibited and restricted carcinogens (rr 383, 384, 386)0
Ch7-P7.1-introPart 7.1 application to hazardous chemicals (r 328)0
Ch7-P7.2-introPart 7.2 lead processes, regulator decisions and lead risk work (rr 392 to 394)0
Ch8-P8.10-Div3-7-introDivisions 3 to 7 Asbestos licensing process, amendment, renewal, suspension, cancellation and registers (rr 491 to 504, 508 to 511, 514 to 528)0
Ch8-P8.3-introPart 8.3 application (r 421)0
Ch8-P8.6-introPart 8.6 application to demolition and refurbishment (r 447)0
Ch8-P8.9-introPart 8.9 application to asbestos-related work (r 478)0
Ch8A-P8A.1-introPart 8A.1 Definitions: processing, crystalline silica substance, engineered stone, controlled processing (rr 529A and 529B)0
Ch9-P9.1-introChapter 9 application and definitions (rr 530 to 534)0
Ch9-P9.2-introInquiry and determination of facilities and operators (rr 537, 539 to 543, 545, 546)0
Ch9-P9.7-introLicensing process, amendment, renewal, transfer, suspension and cancellation (rr 577 to 586, 589 to 592, 595, 597 to 608)0
Sch1-4-introSchedules 1 to 4 Revocation, fees, high risk work licence classes and competency requirements0
Sch11-13-introSchedules 11 to 13 Placard and manifest quantities, manifest content and placard requirements0
Sch14-introSchedule 14 Requirements for health monitoring0
Sch15-18-introSchedules 15 to 18 Major hazard facility chemicals, emergency plan, SMS and safety case content0
Sch5-introSchedule 5 Registration of plant and plant designs0
Sch6-10-introSchedules 6 to 10 Chemical classification, SDS content, ingredient disclosure, labelling and prohibited chemicals0
introStatus, currency and adoption of the model WHS Regulations0
r113-114rr 113 and 114 Only accredited assessors assess high risk work competency, within their accreditation0
r124-139rr 124 to 127 and 139 Accredited assessor duties: documents available, notify changes within 14 days, return documents0
r142r 142 Notify the regulator 5 days before notifiable demolition work0
r143r 143 Demolition work required to be licensed (jurisdictional)0
r144-146rr 144 to 146 Meaning of electrical equipment, installation and work0
r147r 147 Manage electrical risks0
r149r 149 Disconnect unsafe electrical equipment until repaired, tested, replaced or removed0
r150-151rr 150 and 151 Inspect and test plug-in equipment in hostile environments; do not use untested equipment0
r152-153rr 152 and 153 Application of the energised work Division0
r154-156rr 154 to 156 No work on energised equipment; test before work; treat parts as live; prevent re-energising0
r157-161rr 157 to 161 Energised electrical work only when permitted, with risk assessment, SWMS, access control and safety observer0
r16-17rr 16 and 17 Determine work groups so HSRs are accessible, taking all relevant matters into account1
r162r 162 Keep energised work risk assessments and SWMS0
r163r 163 Comply with AS/NZS 3012:2019 on construction and demolition sites0
r164-165rr 164 and 165 Use RCDs for socket outlets in hostile environments and test RCDs regularly0
r166r 166 Keep people, plant and things a safe distance from overhead and underground electric lines0
r167r 167 Purpose of the diving Part0
r168-170rr 168 to 170 Divers hold a current certificate of medical fitness, conditions complied with, kept 1 year0
r171-175rr 171 to 175 Diver and supervisor competence, and sighting and keeping evidence of it0
r176-179rr 176 to 179 Diving risk assessment, supervisor appointment, dive plan and instruction0
r18-20Arr 18 to 20A HSR election procedure, removal and assistant entry notices0
r180-182rr 180 to 182 Keep and verify the dive safety log; keep risk assessments and dive plans0
r183-184rr 183 and 184 High risk diving to AS/NZS 2299.1:20150
r187-188rr 187 and 188 Designers of plant: information to the manufacturer and response to design hazards0
r189r 189 Designers: guarding designed to the hierarchy and to resist bypassing0
r19r 19 Do not unreasonably delay an HSR election0
r190-192rr 190 to 192 Designers: operator controls, emergency stops and warning devices0
r193-194rr 193 and 194 Manufacturers: manufacture, inspect and test to the design; resolve design hazards; guarding0
r195r 195 Manufacturers: obtain the designer's information and pass it on at supply0
r196-197rr 196 and 197 Importers of plant: obtain and pass on information; inspect, test and control hazards0
r198r 198 Suppliers of plant: obtain and give the manufacturer's information0
r199-200rr 199 and 200 Second-hand plant: identify faults, give written notice; scrap and spare parts marking0
r201-202rr 201 and 202 Installers, constructors and commissioners of plant and structures follow the safety information0
r203r 203 Manage plant risks under Part 3.10
r204r 204 Commissioning, decommissioning and dismantling: safe, competent people, information and inspections0
r205-207rr 205 to 207 Prevent unauthorised alteration; use plant as designed; leave idle plant safe0
r208-209rr 208 and 209 Guarding of plant at the workplace, and guarding or insulation against heat and cold1
r21r 21 HSR training entitlement: initial course up to 5 days and 1 day refresher each year0
r210-212rr 210 to 212 Operator controls, emergency stops and warning devices at the workplace0
r213r 213 Maintenance, inspection and testing of plant by a competent person1
r214-215rr 214 and 215 Powered mobile plant: manage overturning, falling objects, ejection, collision; operator protection and warnings0
r216r 216 Roll-over protective structures on tractors0
r218r 218 Industrial lift trucks: suitable attachments, safe operation, passengers only in designed seats0
r219-220rr 219 and 220 Plant that lifts or suspends loads or people0
r22-23rr 22 and 23 Have a written agreed issue resolution procedure containing the default steps, or follow the default procedure1
r221r 221 Tree lopping using a crane and harness0
r222r 222 Industrial robots and remotely or automatically energised plant0
r223r 223 Lasers on plant0
r224r 224 Pressure equipment and gas cylinders0
r225r 225 Scaffolds: completion confirmation, inspections at least every 30 days, repairs and access control0
r226r 226 Records for plant with presence-sensing safeguarding systems0
r228-230rr 228 to 230 Designers of registrable plant designs: design records, standards used, availability0
r231-233rr 231 to 233 Manufacturers, importers and suppliers: supply Schedule 5 Part 1 plant only with a registered design0
r234r 234 Commissioners: commission Schedule 5 Part 2 items only when registered0
r235r 235 Major inspection of registered mobile and tower cranes0
r236r 236 Lifts: lift well fall and falling object protection, safe entry, safe working load sign0
r237r 237 Records of registrable plant for the period of use0
r238r 238 Amusement devices and passenger ropeways: trained operators, daily checks and test runs logged0
r239-240rr 239 and 240 Storage, maintenance, inspection and testing of amusement devices and ropeways0
r24-31rr 24 to 31 Continuity of engagement, WHS entry permit training, form, notices and register0
r241r 241 Annual detailed inspection of amusement devices and ropeways0
r242r 242 Amusement device log book content and manuals kept with the device0
r243-247rr 243 to 247 Register Schedule 5 plant designs, altered designs and items of plant1
r251-254rr 251 to 254 Design verifiers: eligibility, independence, documented verification0
r260-262rr 260 to 262 Pass on the design registration number, keep it near the plant, keep the document available0
r266-277rr 266, 273, 275 and 277 Item registration: apply with a competent inspection, mark the number, renew with a maintenance declaration0
r282r 282 Notify the regulator of changes within 14 days, including alteration, relocation or loss of control0
r287-288Drr 287, 288 and 288D Return registration documents when requested; report loss0
r294r 294 Commissioning client consults the designer on construction-phase design risks0
r295r 295 Designer's written safety report; client obtains it0
r296r 296 Client gives the principal contractor its hazard information1
r297r 297 Manage construction work risks under Part 3.10
r298r 298 Secure the construction workplace from unauthorised access0
r299r 299 Prepare a safe work method statement before high risk construction work1
r300r 300 Carry out high risk construction work in accordance with the SWMS; stop if it is not0
r301-303rr 301 to 303 Give the SWMS to the principal contractor, review it and keep it accessible1
r304r 304 Obtain and use underground essential services information before excavation0
r305r 305 Manage excavation risks: falls in, collapse, falling objects, airborne contaminants0
r306r 306 Trenches 1.5 metres or deeper: secure the area and support all sides0
r308r 308 Principal contractor signage0
r309r 309 Prepare a written WHS management plan before project work starts1
r310-311rr 310 and 311 Inform workers of the WHS management plan and keep it up to date0
r312r 312 Principal contractor obtains SWMS before high risk construction work starts0
r313r 313 Keep the WHS management plan accessible and available0
r314r 314 Arrangements for compliance with specified Part 3.2 Divisions and Part 4.41
r315r 315 Manage materials, idle plant, traffic and essential services risks0
r316-317rr 316 and 317 General construction induction training: provide it and check workers hold a card1
r32-33rr 32 and 33 Application of Part 3.1 and specific requirements0
r326-327rr 326 and 327 Workers keep their induction card available, return it on cancellation, and do not alter it0
r329r 329 Manufacturers and importers classify substances, mixtures and articles before first supply0
r330-331rr 330 and 331 Manufacturers and importers prepare, review and provide safety data sheets1
r332-333rr 332 and 333 Emergency disclosure of ingredient identities to medical practitioners and emergency service workers0
r334-335rr 334 and 335 Manufacturers and importers pack and label hazardous chemicals correctly0
r336r 336 Workers under 16 do not supply flammable gases or liquids into customers' containers or vehicles0
r337-339rr 337 to 339 Suppliers: correct packing, correct labelling and safety data sheets with first supply0
r34r 34 Identify reasonably foreseeable hazards1
r340r 340 Supply prohibited and restricted carcinogens only to authorised persons, with records0
r341-343rr 341 to 343 PCBUs keep hazardous chemicals, decanted containers and pipe work correctly labelled0
r344-345rr 344 and 345 PCBUs obtain current SDS and make them accessible; do not alter SDS1
r346r 346 Keep an up-to-date hazardous chemicals register with SDS1
r347-348rr 347 and 348 Manifest and regulator notification above Schedule 11 manifest quantities1
r349-350rr 349 and 350 Display outer warning placards and placards above placard quantities0
r35r 35 Eliminate risks, or minimise them, so far as is reasonably practicable1
r351r 351 Manage risks of using, handling, generating and storing hazardous chemicals1
r352r 352 Review chemical control measures on specified triggers and at least every 5 years1
r353r 353 Display safety signs next to chemical hazards0
r354r 354 Identify reaction risks and prevent contamination of food and personal products0
r355-356rr 355 and 356 Keep ignition sources out of hazardous areas and keep chemicals stable0
r357-358rr 357 and 358 Spill containment and protection of containers from damage0
r359r 359 Fire protection and firefighting equipment suited to the chemicals1
r36r 36 Apply the hierarchy of control measures1
r360-362rr 360 to 362 Emergency equipment, emergency plans for manifest-quantity sites, and safety equipment0
r363-364rr 363 and 364 Storage and handling systems used as designed; bulk containers securely founded0
r365-367rr 365 to 367 Decommission handling systems free of chemicals; remove underground systems; notify abandoned tanks0
r368-370rr 368 to 370 Provide, and inform workers about, health monitoring for Schedule 14 and other significant exposures1
r37r 37 Keep control measures effective: fit for purpose, suitable, correctly installed and used0
r371-373rr 371 to 373 Health monitoring by an experienced registered medical practitioner, paid by the PCBU, with the required information0
r374-377rr 374 to 377 Obtain health monitoring reports and give copies to the worker, the regulator and other PCBUs0
r378r 378 Keep health monitoring records confidential for at least 30 years1
r379r 379 Supervise workers exposed to hazardous chemicals0
r38r 38 Review and revise control measures, including on an HSR's request1
r380-382rr 380 to 382 Prohibited carcinogens, restricted carcinogens, restricted chemicals and PCBs0
r385-388rr 385, 387 and 388 Carcinogen authorisation holders: report changes, give exposure statements, keep records for 30 years0
r389r 389 Pipeline owners manage transfer risks and outside interference0
r39r 39 Information, training and instruction suitable for the work, risks and controls, and understandable1
r390r 390 Pipeline builders notify the regulator for pipelines crossing public places0
r391r 391 Pipeline operators manage risks, identify contents and notify public-place transfers0
r395r 395 Inform workers and prospective workers of lead health risks1
r396-398rr 396 to 398 Confine lead contamination, clean safely, and prohibit eating, drinking and smoking in lead areas0
r399-400rr 399 and 400 Changing, washing and laundering controls for lead0
r40r 40 General workplace facilities: layout, space, floors, lighting, ventilation, heat and cold, essential services1
r401r 401 Review lead control measures on specified triggers1
r402r 402 Assess each lead process to identify lead risk work, ignoring PPE0
r403-404rr 403 and 404 Notify the regulator of lead risk work within 7 days and of changes0
r405-407rr 405 to 407 Health monitoring for lead risk work: before start, at 1 month, then at blood-lead-based intervals0
r408-410rr 408 to 410 Lead health monitoring supervised by an experienced practitioner, paid by the PCBU, with required information0
r41r 41 Provide and maintain adequate, clean and accessible toilets, drinking water, washing and eating facilities1
r411-414rr 411 to 414 Obtain lead monitoring reports and give them to the worker, regulator and other PCBUs0
r415-417rr 415 to 417 Remove workers at removal blood lead levels, examine within 7 days, return only when safe0
r418r 418 Keep lead health monitoring records confidential for at least 30 years0
r419r 419 Work involving asbestos is prohibited except in the listed cases0
r42r 42 Provide first aid equipment, facilities and trained first aiders2
r420r 420 Eliminate or minimise exposure to airborne asbestos and never exceed the exposure standard0
r422-423rr 422 and 423 Identify or assume asbestos, with samples analysed only by accredited laboratories1
r424r 424 Clearly indicate the presence and location of asbestos, by label where reasonably practicable0
r425-426rr 425 and 426 Prepare, keep, maintain and review the asbestos register1
r427-428rr 427 and 428 Give access to the asbestos register and transfer it on handover0
r429-430rr 429 and 430 Prepare, maintain, share and review the asbestos management plan1
r43r 43 Prepare, maintain, test and implement an emergency plan1
r431-434rr 431 to 434 Manage naturally occurring asbestos under a written plan, with training0
r435-436rr 435 and 436 Provide asbestos health monitoring for removal and related workers0
r437-439rr 437 to 439 Asbestos health monitoring by an experienced practitioner, paid by the PCBU, with required information0
r44r 44 Provide suitable, well-fitting, maintained PPE, ensure it is used, and train in its use1
r440-443rr 440 to 443 Obtain asbestos monitoring reports and share with the worker, regulator and other PCBUs0
r444r 444 Keep asbestos health monitoring records confidential for at least 40 years0
r445r 445 Train workers who may do asbestos removal or asbestos-related work, and keep records1
r446r 446 No high-pressure water or compressed air on asbestos; control power tools and brooms0
r448-450rr 448 to 450 Review the register before demolition or refurbishment and exchange it with the contractor0
r45r 45 PPE for other persons at the workplace0
r451r 451 Where there is no register, inspect before demolition or refurbishment, assume if uncertain, and inform0
r452-453rr 452 and 453 Identify and remove asbestos before demolition, including residential premises0
r454-455rr 454 and 455 Emergency demolition: develop an exposure procedure and notify the regulator0
r456-457rr 456 and 457 Identify and remove asbestos before refurbishment, including residential premises0
r458r 458 Commission licensed removalists, or trained competent persons for minor non-friable work1
r459-461rr 459 to 461 Licensed removalists: supervisor presence, certified and site-trained workers, training records0
r46-47rr 46 and 47 Workers and others use PPE as instructed, do not misuse it, and report defects0
r462-463rr 462 and 463 Licensed removalists inform prospective workers of health risks and obtain the register1
r464-465rr 464 and 465 Prepare, give, keep and make available the asbestos removal control plan0
r466r 466 Notify the regulator at least 5 days before licensed removal (or immediately in emergencies)1
r467-468rr 467 and 468 Inform the person in control, occupants and neighbours before removal work0
r469-470rr 469 and 470 Signs and barricades; limit access to the asbestos removal area0
r471-472rr 471 and 472 Decontamination facilities, and asbestos waste and PPE disposal0
r473-474rr 473 and 474 Independent clearance inspection and clearance certificate before re-occupation0
r475-476rr 475 and 476 Class A work: independent air monitoring, results shared, and action levels0
r477r 477 Removing friable asbestos: enclosure, negative pressure, wet method, monitoring, safe dismantling0
r479-481rr 479 to 481 Asbestos-related work: resolve uncertainty by analysis, inform workers, separate the area0
r48r 48 Remote or isolated work: manage the risks and provide effective communication0
r482r 482 Air monitoring for asbestos-related work and warning of exceedances0
r483-484rr 483 and 484 Asbestos-related work: decontamination facilities, waste and PPE disposal0
r485-488rr 485 to 488 Hold a Class A licence for friable asbestos and ACD, and a Class B (or A) licence for over 10 square metres of non-friable0
r489-490rr 489 and 490 Hold an asbestos assessor licence for Class A air monitoring and clearances0
r49r 49 Keep airborne concentrations below the exposure standard0
r50r 50 Monitor airborne contaminants where uncertain or needed, keep results 30 years, make them accessible2
r505-507rr 505 to 507 Licence holders keep the licence available, notify changes within 14 days, and manage supervisor changes0
r51-52rr 51 and 52 Manage hazardous atmospheres and ignition sources0
r512-513rr 512, 513 and 525 Return licence documents when required and report loss0
r529r 529 Asbestos removal work is supervised by a named supervisor1
r529Cr 529C Process crystalline silica substances only when the processing is controlled0
r529CAr 529CA Assess and record whether CSS processing is high risk1
r529CB-529CCrr 529CB and 529CC Prepare a silica risk control plan for high-risk processing and follow it1
r529CDr 529CD Provide accredited or approved crystalline silica training and keep records0
r529CEr 529CE Air monitoring, regulator reporting of exceedances, and health monitoring for high-risk CSS processing0
r529D-529Frr 529D to 529F Engineered stone benchtops, panels and slabs are prohibited, with narrow exceptions0
r529G-529Jrr 529G to 529J Notify the regulator before processing installed or disposed engineered stone; update, renew and keep notices0
r53r 53 Keep flammable and combustible substances to the lowest reasonably practicable quantity0
r533-536rr 533, 536 and 538 Operators notify the regulator within 3 months when Schedule 15 chemicals exceed 10% of threshold0
r535r 535 A major hazard facility must be licensed, and the operator holds the licence1
r54-55rr 54 and 55 Manage falling objects: prevent free fall, or arrest it0
r544r 544 Comply with conditions imposed on a determination0
r547-549rr 547 to 549 Re-notify increased quantities, new operators notify, and apply for a licence within 24 months0
r551-553rr 551 to 553 Provide a safety case outline within 3 months and alter it when required0
r554r 554 Identify and document all major incidents and major incident hazards, including security1
r555r 555 Conduct and document a comprehensive safety assessment1
r556r 556 Eliminate or minimise major incident risk and mitigate consequences0
r557r 557 Prepare, consult on, share, test and implement the MHF emergency plan1
r558r 558 Establish and implement a documented safety management system1
r559r 559 Review and revise the safety assessment, emergency plan and SMS on specified triggers0
r55A-55Brr 55A and 55B Meaning of psychosocial hazard and psychosocial risk0
r55C-55Drr 55C and 55D Manage psychosocial risks and implement control measures1
r56r 56 Exposure standard for noise0
r560-563rr 560 to 563 Provide the safety case within 24 months, with required content and signed statement; co-ordinate and review0
r564-565rr 564 and 565 Licensed facilities: keep identifying and documenting major incidents and hazards; keep the safety assessment0
r566r 566 Licensed facilities: eliminate or minimise major incident risk and mitigate consequences0
r567r 567 Licensed facilities: keep, test and implement the emergency plan and notify incidents0
r568r 568 Licensed facilities: implement the SMS as the primary means of ensuring safety0
r569-570rr 569 and 570 Licensed facilities: review the assessment, plan and SMS on triggers and at least every 5 years; revise the safety case0
r57r 57 Manage hearing loss risk and keep noise exposure below the standard0
r571r 571 Inform and instruct visitors to a licensed facility1
r572-573rr 572 and 573 Provide information to the local community and authority, and after a major incident1
r574-575rr 574 and 575 Implement a safety role for workers and consult them on MHF matters1
r576r 576 Workers at licensed facilities follow procedures and report potential major incidents0
r58r 58 Provide audiometric testing within 3 months and at least every 2 years0
r587-588rr 587 and 588 Keep the MHF licence available and notify changes within 14 days0
r59r 59 Designers, manufacturers, importers and suppliers: low-noise plant and noise information0
r593-596rr 593, 594, 596 and 607 Return licence documents when required, replace if lost, and apply to renew at least 6 months before expiry0
r60r 60 Manage hazardous manual task risks considering all contributing factors0
r61r 61 Designers, manufacturers, importers and suppliers: design out hazardous manual tasks0
r62-63rr 62 and 63 Confined spaces covered and emergency service exception0
r64r 64 Designers, manufacturers, importers, suppliers, installers and constructors: design out confined space entry0
r65-66rr 65 and 66 No entry before compliance; competent person's written risk assessment1
r67r 67 Issue a written confined space entry permit before directing entry2
r68r 68 Confined space signage at every entry0
r69r 69 Continuous communication and standby monitoring0
r693r 693 Comply with, and ensure compliance with, exemption conditions0
r699r 699 Prescribed serious illnesses for incident notification0
r70-73rr 70 to 73 Isolate connected plant and services, control the atmosphere, flammables and ignition sources0
r74-75rr 74 and 75 Confined space first aid and rescue procedures, access and emergency PPE0
r76-77rr 76 and 77 Confined space training records and retention of permits and assessments0
r78r 78 Manage fall risks; work on the ground or a solid construction; safe access and exit1
r79r 79 Where a fall risk remains: fall prevention device, then work positioning, then fall arrest1
r80r 80 Establish, test and train in rescue procedures when fall arrest is used0
r81-83rr 81 to 83 Hold a high risk work licence for each class of high risk work, with exceptions1
r84r 84 Ensure direct supervision of trainees doing high risk work0
r85r 85 See written evidence of licences, training or certification before allowing high risk work, and keep it0
r94-98rr 94, 96 to 98 and 111 Licence holder duties: keep the licence document available, notify changes, return and replace documents0

Tell me when Australia Model Work Health and Safety Regulations files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for Australia Model Work Health and Safety Regulations, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition