Australia (model for the harmonised WHS jurisdictions: Commonwealth, NSW, Qld, SA, WA, Tas, ACT, NT; not Victoria)

Australia Model Code of Practice: Safe Design of Structures

39 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

39 controls 0 frameworks share controls with it Australia (model for the harmonised WHS jurisdictions: Commonwealth, NSW, Qld, SA, WA, Tas, ACT, NT; not Victoria) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
1.11.1 Integrate control measures early in design so risks are eliminated or minimised across the structure's life0
1.2a1.2 PCBUs and designers owe the primary and designer duties for structures0
1.2b1.2 Know who counts as a designer, including those who alter or modify a design0
1.2c1.2 Clients that commission construction work consult the designer and share site hazard information0
1.2d1.2 Principal contractors plan and manage construction work to control risk0
1.31.3 Judge what is reasonably practicable for the designer using the standards and knowledge of the time0
1.4a1.4 Apply the risk management process to structure design0
1.4b1.4 Work down the hierarchy of controls in design0
1.4c1.4 Select controls with care for residual risk, interaction of hazards and consultation0
2.12.1 Consider the lifecycle: construction, use, maintenance, modification, demolition and disposal0
2.22.2 Ensure designers have, or draw on, the knowledge and capability for safe design0
2.3a2.3 Consult workers who will use the new or refurbished workplace0
2.3b2.3 Consult, cooperate and coordinate between clients, designers and other duty holders0
2.4a2.4 Transfer information on hazards and controls to later stages of the lifecycle0
2.4b2.4 Include significant hazards and residual risks in the information the designer provides0
2.4c2.4 Give the client a written safety report for unusual designs, and pass hazard information to the principal contractor0
2.4d2.4 Consider a WHS file to carry design information through the structure's life0
3.03 Integrate risk management into the design phases with client, designer and constructor collaboration0
3.1a3.1 In pre-design, set the design and risk context, skills and roles0
3.1b3.1 Clients prepare a project brief with safety requirements and give all relevant site information0
3.1c3.1 Research hazards from laws, statistics, alerts, similar designs and workshops0
3.2a3.2 Identify physical and psychosocial hazards early, systematically and beyond one or two people's experience0
3.2b3.2 Design out hazardous manual tasks and meet other regulatory design duties0
3.2c3.2 Use the preliminary hazard framework: siting, high consequence hazards, systems of work, environment and incident mitigation0
3.3a3.3 In design development, work through options by the hierarchy, test and finalise with a safety report0
3.3b3.3 Apply recognised standards and the NCC, and do not assume they control workplace risk0
3.3c3.3 Assess design risks with fact-finding, testing assumptions, testing components and expert consultation0
3.3d3.3 Allocate design process steps and keep construction-stage changes from raising risk0
3.4a3.4 Review design controls during the design and involve those who will build and maintain0
3.4b3.4 Evaluate safety in design after construction and feed lessons back0
4.14.1 Design for safe construction0
4.24.2 Design to facilitate safe use, including controlling psychosocial and violence risks0
4.34.3 Design for safe maintenance, cleaning and servicing0
4.44.4 Redo the design process for modifications, with expert input0
4.54.5 Design for safe demolition and dismantling and give the information demolishers need0
appendicesAppendices A to D: glossary, roles, checklist and case studies0
approvalsEdition: November 2024, current0
scopeScope and application of the code0
statusLegal status: an approved code is admissible evidence, not law0

Tell me when Australia Model Code of Practice: Safe Design of Structures files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for Australia Model Code of Practice: Safe Design of Structures, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition