Australia (model code; in force where approved by a Commonwealth, state or territory WHS regulator)

Australia Model Code of Practice: Preparation of Safety Data Sheets for Hazardous Chemicals

37 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

37 controls 0 frameworks share controls with it Australia (model code; in force where approved by a Commonwealth, state or territory WHS regulator) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
1.2-prepareClassify each substance, mixture or article before first supply and, if it is a hazardous chemical, prepare an SDS before first manufacture or import (or as soon as practicable aft0
1.2-provideGive the current SDS to any person likely to be affected by the chemical who asks for it, and limit changes to the SDS to the manufacturer or importer (others may only attach a mar0
1.3Prepare an SDS for every hazardous chemical, including consumer products, and (as recommended) for unclassifiable chemicals, mixtures with sensitiser or CMR ingredients and enginee0
1.4Chemicals and situations for which no SDS is required0
1.5Classify, label and prepare SDS under GHS 7 from 1 January 2023, update SDS for older GHS 3 labelled stock, and supply the updated SDS with that stock0
2-accuracyWrite the SDS so it accurately describes the chemical's hazards, safe handling, storage and disposal, physical and chemical properties and first aid and emergency response, and inc0
2.1-languageUse plain, precise wording, avoid vague or reassuring phrases, explain any missing information and separate 'no data' from 'negative test results'0
2.1-sched7Meet the Schedule 7 essentials: English language, Australian legal units, the review or preparation date, the Australian manufacturer or importer's name, address and business phone0
2.1-structurePresent all 16 required SDS sections in order, with no blank fields or unexplained abbreviations, a stated version, numbered pages and an end marker, proportionate in length0
2.2For research chemicals, waste products and samples for analysis whose hazards are not fully known, provide at least the reduced Schedule 7 SDS content0
2.3Accept an overseas SDS only if it meets the WHS Regulations; otherwise the importer prepares a compliant Australian SDS after checking every section0
2.4Review each SDS at least every five years, amend it whenever new hazard information or a formulation change arises, and keep it available after the product is withdrawn0
appA-BAppendix A glossary and Appendix B header checklist0
appC-EAppendix C GHS label element tables, Appendix D generic name families and Appendix E related codes and standards0
forewordStatus of the Code, who it is for and how to read must, should and may0
s1-contactSection 1: give the Australian manufacturer or importer's details and an Australian emergency contact available out of hours, confirming any poisons centre arrangement in advance0
s1-identitySection 1: give the product identifier exactly as on the label (all identifiers for a generic SDS), other identifiers and synonyms, the recommended use and known restrictions on us0
s10Section 10: describe reactivity, chemical stability and stabilisers, possible hazardous reactions, conditions to avoid, incompatible materials and hazardous decomposition products0
s11-generalSection 11: present toxicological data for each GHS health hazard class in the set order, based on expert advice and consistent with the classification, listing classes with no dat0
s11-routesSection 11: cover every exposure route, early symptoms through to severe effects, delayed and chronic effects, dose and effect levels and interactive effects, flagging animal data 0
s12Section 12: give ecotoxicity, persistence and degradability, bioaccumulation, soil mobility and other environmental effects for each ingredient where available, with test condition0
s13Section 13: give disposal, recycling and reclamation advice for the chemical and its container, covering containers and methods, properties affecting disposal, sewage effects and i0
s14Section 14: give UN number, proper shipping name, transport hazard class, packing group, marine pollutant and environmental hazard status, special precautions and the Hazchem or em0
s15Section 15: identify other regulatory controls on the chemical, including Poisons Standard schedule, carcinogen prohibitions or licensing, AgVet and industrial chemicals listing, a0
s16Section 16: record the date of the latest revision and the changes made, keep an explanation of changes available on request, and give a key to abbreviations and the main data sour0
s2Section 2: state the full GHS hazard classification, the signal word, hazard and precautionary statements and relevant non-GHS hazard statements, with optional black and white pict0
s3-genericSection 3: use a generic name only for a genuinely confidential ingredient in the listed lower health hazard categories that adds no other class and has no exposure standard, choos0
s3-identitySection 3: disclose ingredient chemical identities as Schedule 8 requires, including classification-relevant impurities and stabilisers, and non-hazardous ingredients with an expos0
s3-proportionsSection 3: disclose ingredient proportions in descending order, using the set confidential ranges only where the exact figure is confidential and preferring narrower ranges, totall0
s4Section 4: give first aid instructions for each exposure route, the main immediate and delayed symptoms, when medical attention is needed, and any antidotes, facilities and first a0
s5Section 5: name suitable and unsuitable extinguishing media, specific fire hazards and combustion products, firefighter precautions and PPE, and the Hazchem Code0
s6Section 6: give spill and release advice covering personal protection, ignition control, evacuation, environmental precautions and containment and clean-up methods, distinguishing 0
s7Section 7: state how the chemical can be used safely, practices to avoid, hygiene measures and storage conditions that address incompatibilities, ignition, environmental factors, s0
s8-controlsSection 8: specify engineering controls for the intended use, then PPE consistent with the hierarchy of controls, naming the type and material of eye, skin, respiratory and thermal0
s8-monitoringSection 8: describe required biological monitoring and safe biological levels with their source, and give enough context for any control banding recommendation0
s8-standardsSection 8: list the Australian workplace exposure standards (TWA, STEL, peak, notations) for each ingredient and generated contaminant, using recognised overseas limits where none 0
s9Section 9: give the listed physical and chemical properties for the chemical as supplied, with units, methods and interpretation, stating where data are unavailable rather than lea0

Tell me when Australia Model Code of Practice: Preparation of Safety Data Sheets for Hazardous Chemicals files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for Australia Model Code of Practice: Preparation of Safety Data Sheets for Hazardous Chemicals, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition