Australia (model for the harmonised WHS jurisdictions: Commonwealth, NSW, Qld, SA, WA, Tas, ACT, NT; not Victoria)

Australia Model Code of Practice: Managing the Work Environment and Facilities

45 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

45 controls 0 frameworks share controls with it Australia (model for the harmonised WHS jurisdictions: Commonwealth, NSW, Qld, SA, WA, Tas, ACT, NT; not Victoria) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
1.1a1.1 The PCBU must provide a work environment and facilities free of risk, physical and psychosocial0
1.1b1.1 Persons managing or controlling a workplace keep it, its entry and exit safe0
1.1c1.1 Designers of structures, officers, workers and visitors hold their own duties0
1.1d1.1 Consult workers on the adequacy of facilities and give feedback0
1.1e1.1 Consult, cooperate and coordinate with other duty holders; identify needed facilities0
1.21.2 Manage work environment and facilities risks through the four step process0
1.31.3 Monitor and maintain the work environment and facilities0
2.02 General workplace facilities: layout, space, floors, lighting, ventilation, heat and cold, essential services0
2.0b2 Psychosocial risks: eliminate them or minimise them, having regard to design and layout of the workplace0
2.12.1 Provide safe entry and exit, including for workers with disability0
2.22.2 Lay out work areas with clear space to move, work and evacuate0
2.32.3 Provide workstations and seating suited to the person and the task0
2.42.4 Design, install and maintain floors and surfaces to prevent slips, trips and strain0
2.52.5 Provide lighting suited to the task, outdoors and in an emergency0
2.62.6 Keep the workplace tidy with spills cleaned, walkways clear and waste removed0
2.7a2.7 Ventilate workplaces so work is possible without risk to health0
2.7b2.7 Service ventilation systems, control Legionella risk and keep airborne contaminants below exposure standards0
2.8a2.8 Manage heat and cold exposure and train workers to recognise illness0
2.8b2.8 Provide thermal comfort for the work, noting psychosocial effects0
2.8c2.8 Control hot environments and treat heat illness0
2.8d2.8 Control cold environments and treat hypothermia0
3.03 Provide and maintain adequate and accessible facilities in good order0
3.13.1 Give all workers access to facilities within reasonable reach and time0
3.23.2 Provide free clean drinking water at all times, safely supplied0
3.3a3.3 Provide clean toilets to all workers while at work, in adequate number0
3.3b3.3 Design toilets for privacy, emergency access, lighting, ventilation and supplies0
3.3c3.3 Consider period products where access to personal supplies may be limited0
3.3d3.3 Make toilets accessible, including for mobile, temporary and remote work0
3.43.4 Provide hand washing facilities in sufficient number and of suitable design0
3.53.5 Provide hygienic eating, food preparation and storage facilities0
3.63.6 Provide secure personal storage0
3.73.7 Provide private change rooms with storage where workers must change0
3.83.8 Provide showers and drying facilities for dirty, hot or hazardous work0
4.14.1 Give outdoor workers shelter and sun protection0
4.2a4.2 Manage remote or isolated work risks and ensure effective communication0
4.2b4.2 Assess remote or isolated work risks against the listed factors0
4.2c4.2 Control remote or isolated work with buddy systems, design, communication, tracking, training and first aid0
4.34.3 Keep worker accommodation safe where the PCBU provides it0
5.15.1 Write clear emergency procedures and practise evacuation at least every 12 months0
5a5 Prepare, maintain, test and implement an emergency plan0
5b5 Coordinate and review emergency plans for shared workplaces and consult on changes0
appendicesAppendices A to C: glossary, checklist and example facilities0
approvalsEdition: December 2025, current0
scopeScope and application of the code0
statusLegal status: an approved code is admissible evidence, not law0

Tell me when Australia Model Code of Practice: Managing the Work Environment and Facilities files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for Australia Model Code of Practice: Managing the Work Environment and Facilities, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition