1.1a | 1.1 Work out who the PCBU and the workers are, including shared and contracted arrangements | 0 |
1.1b | 1.1 Meet the primary duty and do not let patient or client care override worker safety | 0 |
1.1c | 1.1 Consult workers, HSRs and other duty holders | 0 |
1.2 | 1.2 Make worker duties known to every kind of worker in the industry | 0 |
1.3 | 1.3 Exercise officer due diligence | 0 |
1.4 | 1.4 Design, supply and install buildings and equipment without creating WHS risks | 0 |
1.5 | 1.5 Make patients, clients, families and visitors aware of what is expected of them | 0 |
2.0 | 2 Prepare the risk management process: involve the right people and plan recording | 0 |
2.1a | 2.1 Identify hazards by varied methods and make reporting easy and safe | 0 |
2.1b | 2.1 Seek knowledge about controls: ignorance of WHS issues is not a defence | 0 |
2.2a | 2.2 Assess risk by consequence and likelihood, or duration, frequency and severity, and consider hazards together | 0 |
2.2b | 2.2 Assess risk in changing or unknown environments with pre-visit and dynamic risk assessments | 0 |
2.3a | 2.3 Control risks: eliminate first, brainstorm, apply the hierarchy and avoid new hazards | 0 |
2.3b | 2.3 Judge what is reasonably practicable with a presumption in favour of safety over cost | 0 |
2.3c | 2.3 Apply good work design from the earliest opportunity | 0 |
2.4a | 2.4 Review controls regularly and on triggers | 0 |
2.4b | 2.4 Provide suitable information, training, instruction and supervision, including for diverse workers | 0 |
2.4c | 2.4 Show leadership commitment through resourcing, consultation and example | 0 |
2.5 | 2.5 Consult workers when managing risks, including on changes, and make consultation accessible | 0 |
2.6 | 2.6 Consult, cooperate and coordinate with other employers and organisations that share duties | 0 |
2.7 | 2.7 Use interim controls where needed, but never as the permanent fix, and act at once on serious danger | 0 |
2.8 | 2.8 Notify the regulator of notifiable incidents and preserve the site | 0 |
3.10a | 3.10 Treat work vehicles as workplaces and manage transport of patients and clients | 0 |
3.10b | 3.10 Manage emergency response driving and prevent vehicle roll-aways | 0 |
3.10c | 3.10 Identify and control vehicle risks | 0 |
3.11a | 3.11 Manage electrical risks: RCDs, malfunctioning equipment, competent testing and reporting | 0 |
3.11b | 3.11 Identify and control electrical risks | 0 |
3.1a | 3.1 Manage hazardous manual tasks and people handling so no one lifts a person unaided | 0 |
3.1b | 3.1 Assess hazardous manual tasks at the right times and look at all sources of risk | 0 |
3.2a | 3.2 Manage fatigue as a hazard in its own right and as a cause of other incidents | 0 |
3.2b | 3.2 Identify fatigue hazards across hours, tasks and individual factors | 0 |
3.2c | 3.2 Control fatigue through rostering, work design and support | 0 |
3.3a | 3.3 Manage psychosocial risks through controls, not only wellbeing programs | 0 |
3.3b | 3.3 Identify the common psychosocial hazards in healthcare and social assistance work | 0 |
3.3c | 3.3 Control psychosocial risk through the work environment, tools and work design | 0 |
3.3d | 3.3 Train supervisors and set behaviour standards, and address harmful behaviours between colleagues early | 0 |
3.4a | 3.4 Protect workers from violence, aggression and harassment from patients, clients, families and the public | 0 |
3.4b | 3.4 Identify violence, aggression and harassment hazards | 0 |
3.4c | 3.4 Control violence through the physical environment and equipment | 0 |
3.4d | 3.4 Control violence through work design: staffing, screening, behaviour plans and procedures | 0 |
3.4e | 3.4 Train workers in recognising and de-escalating violence and run response teams and briefings | 0 |
3.5a | 3.5 Manage biological hazards and provide PPE properly | 0 |
3.5b | 3.5 Identify biological hazards in the work environment, tasks and exposure routes | 0 |
3.5c | 3.5 Control biological hazards and strengthen controls during outbreaks | 0 |
3.6a | 3.6 Meet the hazardous chemical duties on labels, safety data sheets, register, exposure standards and health monitoring | 0 |
3.6b | 3.6 Control airborne contaminants and the chemical work environment, including the exposure limit transition | 0 |
3.6c | 3.6 Manage the risks of cytotoxic drugs, related laundry and waste | 0 |
3.6d | 3.6 Identify and control chemical risks in the workplace and in homes | 0 |
3.7a | 3.7 Provide a work environment with safe layout, space, lighting, surfaces, ventilation and temperature | 0 |
3.7b | 3.7 Provide first aid, facilities and emergency plans, including for work in homes | 0 |
3.7c | 3.7 Design entries, exits, aisles, stairs, floors and lighting for safe movement | 0 |
3.7d | 3.7 Design facilities for the people and tasks they serve | 0 |
3.7e | 3.7 Ventilate healthcare spaces to limit airborne biological hazards | 0 |
3.7f | 3.7 Manage remote or isolated work and provide effective communication (r 48) | 0 |
3.7g | 3.7 Manage WHS risks in private homes, including smoking and the right to refuse unsafe work | 0 |
3.7h | 3.7 Identify and control work environment risks | 0 |
3.8a | 3.8 Prevent slips, trips and falls through design, surfaces, lighting and housekeeping | 0 |
3.8b | 3.8 Identify and control slip, trip and fall risks | 0 |
3.9a | 3.9 Meet the equipment (plant) duties across its life and make sure it is used only as designed | 0 |
3.9b | 3.9 Control radiation risks from medical imaging and treatment equipment | 0 |
3.9c | 3.9 Identify and control equipment risks | 0 |
edition | Edition, approvals and the industry context | 0 |
scope | Scope and application of the code | 0 |
status | Legal status: an approved code is admissible evidence, not law | 0 |