Australia (called up by state and territory building regulation; mandatory for NSW buildings with annual fire safety statements from 13 February 2026)

AS 1851:2012 Routine Service of Fire Protection Systems and Equipment

67 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

67 controls 0 frameworks share controls with it Australia (called up by state and territory building regulation; mandatory for NSW buildings with annual fire safety statements from 13 February 2026) verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
1.1-1.61.1 to 1.6 Scope, objective, application, referenced documents, definitions and abbreviations0
1.101.10 Competent persons0
1.111.11 Frequency and tolerances of routine service intervals0
1.121.12 Systems interface test0
1.131.13 Adverse operating environments0
1.141.14 Precautions before and after routine service0
1.151.15 Defect rectification0
1.161.16 Routine service records: logbooks, tags, labels, summary records and retention0
1.171.17 Reports: defects, non-conformances, out of tolerance activities and yearly condition report0
1.71.7 Routine service process and procedures0
1.81.8 Baseline data0
1.91.9 System retrofit0
10.210.1 and 10.2 Portable and wheeled fire extinguishers: service conditions, defects, condemning, recharging and location records0
10.4.110.3 and 10.4.1 Portable and wheeled fire extinguishers: frequency and six-monthly service0
10.4.210.4.2 Portable and wheeled fire extinguishers: yearly service0
10.4.310.4.3 Portable and wheeled fire extinguishers: five-yearly service and pressure test0
11.2-11.411.1 to 11.4 Fire blankets0
12.2-12.312.1 to 12.3 Passive fire and smoke systems: scope, accessibility, documentation, labels and frequency0
12.4.112.4.1 Fire and smoke barriers: walls, floors, ceilings, service penetrations, control joints and access panels (yearly)0
12.4.212.4.2 Fire-protected structural members (yearly)0
12.4.3.112.4.3.1 Hinged and pivoted fire-resistant doorsets (six-monthly)0
12.4.3.212.4.3.2 Horizontal sliding fire doors (three-monthly and six-monthly)0
12.4.412.4.4 Hinged and pivoted smoke doors (six-monthly)0
12.4.512.4.5 Fire shutters (yearly)0
12.4.6-12.4.712.4.6 and 12.4.7 Fire-rated glazing and fire-protected air ducts (yearly)0
13.2-13.313.1 to 13.3 Fire and smoke control features of mechanical services: application, design and installation survey, dual duty systems and frequency0
13.4.1-AD13.4.1.5 to 13.4.1.14 Air control dampers, smoke and heat vents, fire and smoke curtains and motorized relief openings0
13.4.1-EQ13.4.1.15 to 13.4.1.27 Electric heaters, kitchen exhausts, outdoor intakes, variable frequency inverters, compressors, motor control centres, main switchboards and fire fan control0
13.4.1-FD13.4.1.2 to 13.4.1.4 Fans and motors (three-monthly and yearly) and fire and smoke dampers (yearly)0
13.4.213.4.2 Fire mode tests: exit pressurization, system changeover, smoke exhaust, shutdown and smoke dampers0
13.4.313.4.3 Design and installation survey of smoke control systems (yearly)0
14.2-14.414 Emergency planning in facilities: prior arrangements and six-monthly and yearly verification0
2.2-2.32.1 to 2.3 Sprinkler systems: scope, routine service, survey, records and frequency0
2.4.22.4.2 Wet pipe sprinkler system service schedules (monthly to thirty-yearly)0
2.4.32.4.3 Dry pipe sprinkler system service schedules0
2.4.42.4.4 Deluge and water spray system service schedules0
2.4.52.4.5 Pre-action sprinkler system service schedules0
3.2-3.33.1 to 3.3 Fire pumpsets: scope, inoperative precautions, isolation of start devices and frequency0
3.4.13.4.1 Fire pumpsets: monthly service schedule0
3.4.2-3.4.33.4.2 and 3.4.3 Fire pumpsets: six-monthly and yearly service schedules including the annual full flow test0
3.4.4-3.4.53.4.4 and 3.4.5 Fire pumpsets five-yearly service and hose reel and pressure maintenance (jacking) pumpsets0
4.2-4.34.1 to 4.3 Fire hydrant systems: scope, survey, records and frequency0
4.4.1-4.4.24.4.1 and 4.4.2 Fire hydrant systems: monthly (pump-related) and six-monthly service schedules0
4.4.34.4.3 Fire hydrant systems: yearly service schedule0
4.4.44.4.4 Fire hydrant systems: five-yearly service schedule0
5.2-5.35.1 to 5.3 Water storage tanks: out of service precautions, frequency and liner life0
5.4.1-5.4.35.4.1 to 5.4.3 Water storage tanks: monthly, six-monthly and yearly service schedules0
5.4.45.4.4 Water storage tanks: ten-yearly and pressure vessel inspection schedule0
6.2-6.36.1 to 6.3 Fire detection and alarm systems: scope, precautions and frequency0
6.4.1-5Y6.4.1.5 Fire detection and alarm: five-yearly service0
6.4.1-M66.4.1.2 and 6.4.1.3 Fire detection and alarm: monthly and six-monthly service (including special hazard controls)0
6.4.1-Y6.4.1.4 Fire detection and alarm: yearly service and survey0
6.4.26.4.2 Smoke alarms and heat alarms0
6.4.36.4.3 Emergency warning systems0
6.4.46.4.4 Emergency intercom systems0
7.2-7.37.1 to 7.3 Special hazard systems: scope, precautions, mechanical isolation and frequency0
7.4.2-7.4.37.4.2 and 7.4.3 Special hazard systems: monthly and six-monthly service schedules0
7.4.47.4.4 Special hazard systems: yearly service schedule0
7.4.57.4.5 Special hazard systems: ten-yearly service schedule0
8.28.1 and 8.2 Delivery lay flat fire hose: defects, repairs, condemned hose, after use and identification0
8.48.3 and 8.4 Delivery lay flat fire hose: yearly service and pressure test0
9.29.1 and 9.2 Fire hose reels: labels, isolation valves, pumps, after-use procedure, interfaces and location records0
9.49.3 and 9.4 Fire hose reels: six-monthly and yearly service schedules0
APP-FAppendix F (normative) Battery capacity calculation and battery discharge test0
APP-GAppendix G (normative) Fire detector testing0
APP-INFInformative Appendices B, D, E, H, I and J0
introStatus, edition and legal effect of AS 1851-20120

Tell me when AS 1851:2012 Routine Service of Fire Protection Systems and Equipment files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for AS 1851:2012 Routine Service of Fire Protection Systems and Equipment, drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition