United States

APIC Implementation Guide: Preventing Catheter-Associated Bloodstream Infections (CABSI) in Adults (2025)

127 controls. 0 other frameworks in our corpus share controls with it. Here is all of it, and how much of it you are already doing.

Page built . This page is derived from the framework corpus, which changes when the corpus is extended rather than daily.

127 controls 0 frameworks share controls with it United States verified against its source document

Every control below is one this framework asks for. The right hand column counts how many other frameworks in our corpus carry the same control, which is the difference between doing this work once and doing it again for the next standard.

There is no implementation kit for this framework yet. The control list and the overlap above are free and complete.

What you already have

Frameworks whose controls overlap this one, most first. If you run any of them, the count is roughly what you have already evidenced.

No measured overlap with another framework in the corpus.

Every control

CodeControlAlso in
INTRO-01Purpose of the implementation guide0
INTRO-02Learning objectives for sections one to four0
INTRO-03Regulatory bodies compared with accrediting bodies0
S2_Education-1Schedule education at hire and at intervals0
S2_Education-10Training on vessel assessment and device insertion0
S2_Education-11Educate on maintenance bundle elements0
S2_Education-12Educate on daily device review0
S2_Education-13Educate on blood culture ordering0
S2_Education-14Educate on blood culture collection0
S2_Education-15Educate on patient hygiene treatment0
S2_Education-16Provide patient education on device care0
S2_Education-2Assess competency by observed performance0
S2_Education-3Oversee education through a multidisciplinary team0
S2_Education-4Sort roles by level of requirement0
S2_Education-5Assign educators and trainers0
S2_Education-6Develop role specific education and validation0
S2_Education-7Document instruction and training0
S2_Education-8Evaluate knowledge, performance and records0
S2_Education-9Educate staff who request or order a device0
S2_Equipment_and_Supplies-1Provide accessible insertion and maintenance supplies0
S2_Equipment_and_Supplies-10Select locking agents and hub disinfection supplies0
S2_Equipment_and_Supplies-11Stock supporting equipment for insertion0
S2_Equipment_and_Supplies-12Design dressing change kits with multidisciplinary input0
S2_Equipment_and_Supplies-13Standardize dressing change kit contents0
S2_Equipment_and_Supplies-14Align dressing, antimicrobial agent and securement0
S2_Equipment_and_Supplies-15Match dressing change antisepsis and PPE0
S2_Equipment_and_Supplies-16Stock additional dressing change supplies0
S2_Equipment_and_Supplies-17Provide chlorhexidine patient hygiene products0
S2_Equipment_and_Supplies-18Package blood culture collection supplies together0
S2_Equipment_and_Supplies-19Use diversion devices to cut contamination0
S2_Equipment_and_Supplies-2Train staff to select and use supplies0
S2_Equipment_and_Supplies-3Define what aseptic technique means in policy0
S2_Equipment_and_Supplies-4Select the least invasive suitable device0
S2_Equipment_and_Supplies-5Choose catheter materials and coatings0
S2_Equipment_and_Supplies-6Design insertion kits with multidisciplinary input0
S2_Equipment_and_Supplies-7Standardize insertion kit contents0
S2_Equipment_and_Supplies-8Match antisepsis supplies and PPE to technique0
S2_Equipment_and_Supplies-9Select dressings and securement devices0
S2_Information_Technology-1Use electronic technology to support prevention0
S2_Information_Technology-2Reassess and develop the electronic record0
S2_Information_Technology-3Build prompts for high risk scenarios0
S2_Information_Technology-4Monitor documentation compliance through reports0
S2_Information_Technology-5Choose surveillance software on assessed need0
S2_Information_Technology-6Keep dashboards accurate and widely shared0
S2_Information_Technology-7Adopt artificial intelligence as approved0
S2_Infrastructure-1Establish a facility CABSI prevention program0
S2_Infrastructure-2Multidisciplinary risk assessment of local CABSI risk0
S2_Infrastructure-3Written plan of prevention strategies0
S2_Key_Participants-1Appoint a team leader0
S2_Key_Participants-2Required multidisciplinary team membership0
S2_Key_Participants-3Add roles to match facility needs0
S2_Policies_and_Procedures-1Maintain a CABSI prevention policy0
S2_Policies_and_Procedures-10Define aseptic insertion practices0
S2_Policies_and_Procedures-11Set frequency of device necessity review0
S2_Policies_and_Procedures-12Cover maintenance, hygiene and documentation0
S2_Policies_and_Procedures-13Cover specimen collection and storage0
S2_Policies_and_Procedures-14Require patient education0
S2_Policies_and_Procedures-2Ground the policy in evidence based guidelines0
S2_Policies_and_Procedures-3Write policy elements that can be surveyed0
S2_Policies_and_Procedures-4State education type and frequency0
S2_Policies_and_Procedures-5Define responsibilities and competency per role0
S2_Policies_and_Procedures-6State training requirements for each activity0
S2_Policies_and_Procedures-7State indications for device use0
S2_Policies_and_Procedures-8Define the ordering and documentation process0
S2_Policies_and_Procedures-9Describe vessel and condition assessment0
S2_Risk_Assessment-1Assess leadership support and culture0
S2_Risk_Assessment-2Review CABSI rates and standardized infection ratios0
S2_Risk_Assessment-3Review vascular access device utilization0
S2_Risk_Assessment-4Use cause analysis findings0
S2_Risk_Assessment-5Examine process measures and standardization0
S2_Risk_Assessment-6Assess population specific risks0
S2_Risk_Assessment-7Check availability of key resources0
S2_Risk_Assessment-8Check training and staffing levels0
S2_Risk_Assessment-9Review patency and flushing protocols0
S3_Additional-Insertion-1Insertion bundle built from the strongest evidence0
S3_Additional-Insertion-2Custom insertion kits0
S3_Additional-Insertion-3Additional trained personnel for insertion0
S3_Additional-Insertion-4Insertion technology and simulation training0
S3_Additional-Insertion-5New catheter materials for insertion0
S3_Additional-Maintenance-1Post-insertion care and maintenance bundle0
S3_Additional-Maintenance-2Custom dressing change kits0
S3_Additional-Maintenance-3Second trained person at dressing change0
S3_Additional-Maintenance-4New products for maintenance practice0
S3_Additional-Maintenance-5Daily CHG treatment outside the ICU0
S3_Essential-Insertion-1VAD use limited to a clinical indication0
S3_Essential-Insertion-2Vascular visualization available and staff trained0
S3_Essential-Insertion-3Clinical and venous assessment before catheter choice0
S3_Essential-Insertion-4Aseptic insertion with sterile supplies0
S3_Essential-Insertion-5Securement and stabilization after insertion0
S3_Essential-Maintenance-1Aseptic maintenance technique matched to the device0
S3_Essential-Maintenance-2Dressing clean, dry, intact and changed on schedule0
S3_Essential-Maintenance-3Disinfection of the catheter access point0
S3_Essential-Maintenance-4Administration set intervals by infusate0
S3_Essential-Maintenance-5Daily CHG treatment in adult ICU patients0
S3_Essential-Maintenance-6Blood specimen collection, transport and storage0
S3_Essential-Maintenance-7Patency assessed before every use0
S3_Essential-Maintenance-8Removal once the indication has ended0
S3_Essential-Maintenance-9No routine replacement at fixed intervals0
S4_Outcome-1CABSI rate calculation and reporting0
S4_Outcome-2CLABSI rate calculation0
S4_Outcome-3CLABSI standardized infection ratio0
S4_Outcome-4CVAD standardized utilization ratio0
S4_Outcome-5Cumulative attributable difference target0
S4_Outcome-6TAP reports for location prioritization0
S4_Process-1Routine process measurement and escalation0
S4_Process-10Securement type frequency at insertion0
S4_Process-11Insertion indication frequency0
S4_Process-12Patient location at insertion0
S4_Process-13Inserter role frequency0
S4_Process-14CVAD insertion bundle compliance metric0
S4_Process-15Daily necessity indication metric0
S4_Process-16Dwell time to infection event0
S4_Process-17Average dwell time by device type0
S4_Process-18Blood culture positivity rate0
S4_Process-19Blood culture organism frequency0
S4_Process-2Direct observation of practice0
S4_Process-20Blood culture collection source frequency0
S4_Process-21Paired blood culture contamination metric0
S4_Process-22Daily CHG treatment documentation compliance0
S4_Process-23Epidemiologic deep dive into CABSI cases0
S4_Process-3Point prevalence rounding at set intervals0
S4_Process-4Frontline staff interviews0
S4_Process-5Automated EMR process metrics0
S4_Process-6Manual chart review for non-discrete data0
S4_Process-7Insertion site frequency metric0
S4_Process-8Device type frequency metric0
S4_Process-9Lumen number frequency metric0

Tell me when APIC Implementation Guide: Preventing Catheter-Associated Bloodstream Infections (CABSI) in Adults (2025) files something new

One email when a public company newly discloses something this framework governs, naming the company and what our corpus says it puts in scope. Nothing else, and one click to stop.

What this page is

A control-level reference for APIC Implementation Guide: Preventing Catheter-Associated Bloodstream Infections (CABSI) in Adults (2025), drawn from our framework corpus. Control codes and titles are references to the standard, not reproductions of it. The overlap counts and the auditor artefacts are our own work and are the part you will not find elsewhere.

Measure this against what you already run · All frameworks · Today's edition